Hi,
On Sun, Aug 31, 2025 at 11:20 PM Michael Walle <[email protected]> wrote:
>
> Hi,
>
> On Fri Aug 29, 2025 at 12:52 AM CEST, Doug Anderson wrote:
> > > On Thu, Aug 21, 2025 at 5:23 AM Michael Walle <[email protected]> wrote:
> > > >
> > > > The bridge has three bootstrap pins which are sampled to determine the
> > > > frequency of the external reference clock. The driver will also
> > > > (over)write that setting. But it seems this is racy after the bridge is
> > > > enabled. It was observed that although the driver write the correct
> > > > value (by sniffing on the I2C bus), the register has the wrong value.
> > > > The datasheet states that the GPIO lines have to be stable for at least
> > > > 5us after asserting the EN signal. Thus, there seems to be some logic
> > > > which samples the GPIO lines and this logic appears to overwrite the
> > > > register value which was set by the driver. Waiting 20us after
> > > > asserting the EN line resolves this issue.
> > > >
> > > > Signed-off-by: Michael Walle <[email protected]>
> > > > Reviewed-by: Douglas Anderson <[email protected]>
> > >
> > > nit: officially you're supposed to move your Signed-off-by all the way
> > > at the bottom of all the other tags any time you post a patch. I don't
> > > think it's important enough to re-send, though.
> > >
> > > In any case, thanks for re-posting. I guess it kinda stagnated. I'll
> > > give this another week on the list and then plan to apply to
> > > drm-misc-fixes unless there are any other comments.
> >
> > I realized that this is lacking a Fixes: tag. I went back and
> > confirmed that even in the first version of the driver, AKA commit
> > a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver"),
> > we still had no delay between these two lines:
> >
> > pm_runtime_get_sync(pdata->dev);
> >
> > /* configure bridge ref_clk */
> > ti_sn_bridge_set_refclk_freq(pdata);
> >
> > ...and the last line of the runtime resume function was turning on the
> > enable. So I believe this means that the bug has always been there.
> > Does that sound right to others? If so, I'll add that Fixes tag when
> > applying.,..
>
> Yes, that's right. Thanks for amending the patch.
Pushed to drm-misc-fixes:
[1/1] drm/bridge: ti-sn65dsi86: fix REFCLK setting
commit: bdd5a14e660062114bdebaef9ad52adf04970a89
