commit d34d6feaf4a76833effcec0b148b65946b04cde8 upstream.
Change the AUX DPCD probe address to DP_TRAINING_PATTERN_SET. Using
DP_DPCD_REV for this is not compliant with the DP Standard and it leads
to link training failures at least on a DP2.0 docking station when using
UHBR link rates.
This patch is a revert of commit 944e732be9c3 ("drm/dp: Change AUX DPCD
probe address from DPCD_REV to LANE0_1_STATUS") and the corresponding
fix for commit 05981233cf2e ("Revert "drm/dp: Change AUX DPCD probe
address from DPCD_REV to LANE0_1_STATUS") in the v6.16.y tree.
This change is only meant to be applied in the v6.16.y tree, not in
earlier stable trees.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: [email protected]
Cc: [email protected] # v6.16
Signed-off-by: Imre Deak <[email protected]>
---
drivers/gpu/drm/display/drm_dp_helper.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/display/drm_dp_helper.c
b/drivers/gpu/drm/display/drm_dp_helper.c
index f2a6559a27100..ea78c6c8ca7a6 100644
--- a/drivers/gpu/drm/display/drm_dp_helper.c
+++ b/drivers/gpu/drm/display/drm_dp_helper.c
@@ -725,7 +725,7 @@ ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned
int offset,
* monitor doesn't power down exactly after the throw away read.
*/
if (!aux->is_remote) {
- ret = drm_dp_dpcd_probe(aux, DP_DPCD_REV);
+ ret = drm_dp_dpcd_probe(aux, DP_TRAINING_PATTERN_SET);
if (ret < 0)
return ret;
}
--
2.49.1
