This panel requires dual-channel mode. The device accepts video-mode data
on 8 lanes and will therefore need a dual-channel DSI controller. The two
interfaces that make up this device need to be instantiated in the
controllers that gang up to provide the dual-channel DSI host.
Signed-off-by: Svyatoslav Ryhel <clamo...@gmail.com>
---
drivers/gpu/drm/panel/Kconfig | 15 ++
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-sharp-lq079l1sx01.c | 232 ++++++++++++++++++
3 files changed, 248 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-sharp-lq079l1sx01.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index aad4e0da8f75..51f3bd2d3048 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -841,6 +841,21 @@ config DRM_PANEL_SEIKO_43WVF1G
Say Y here if you want to enable support for the Seiko
43WVF1G controller for 800x480 LCD panels
+config DRM_PANEL_SHARP_LQ079L1SX01
+ tristate "Sharp LQ079L1SX01 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+ help
+ Say Y here if you want to enable support for Sharp LQ079L1SX01
+ TFT-LCD modules. The panel has a 2560x1600 resolution and uses
+ 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
+ the host.
+
+ To compile this driver as a module, choose M here: the module
+ will be called panel-sharp-lq079l1sx01.
+
config DRM_PANEL_SHARP_LQ101R1SX01
tristate "Sharp LQ101R1SX01 panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index a6a100e4c4e6..166d1969d024 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01) +=
panel-samsung-s6e88a0-ams4
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_SOFEF00) += panel-samsung-sofef00.o
obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
+obj-$(CONFIG_DRM_PANEL_SHARP_LQ079L1SX01) += panel-sharp-lq079l1sx01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
diff --git a/drivers/gpu/drm/panel/panel-sharp-lq079l1sx01.c
b/drivers/gpu/drm/panel/panel-sharp-lq079l1sx01.c
new file mode 100644
index 000000000000..7696dfe18e31
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-sharp-lq079l1sx01.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 NVIDIA Corporation
+ * Copyright (c) 2024 Svyatoslav Ryhel <clamo...@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+
+static const struct regulator_bulk_data sharp_supplies[] = {
+ { .supply = "avdd" }, { .supply = "vddio" },
+ { .supply = "vsp" }, { .supply = "vsn" },
+};
+
+struct sharp_panel {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi[2];
+
+ struct gpio_desc *reset_gpio;
+ struct regulator_bulk_data *supplies;
+
+ const struct drm_display_mode *mode;
+};
+
+#define mipi_dsi_dual_dcs_write_seq_multi(dsi_ctx, dsi0, dsi1, cmd, seq...)
\
+ do {
\
+ dsi_ctx.dsi = dsi0;
\
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, cmd, seq);
\
+ dsi_ctx.dsi = dsi1;
\
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, cmd, seq);
\
+ } while (0)
+
+static inline struct sharp_panel *to_sharp_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct sharp_panel, panel);
+}
+
+static void sharp_panel_reset(struct sharp_panel *sharp)
+{
+ gpiod_set_value_cansleep(sharp->reset_gpio, 1);
+ usleep_range(2000, 3000);
+ gpiod_set_value_cansleep(sharp->reset_gpio, 0);
+ usleep_range(2000, 3000);
+}
+
+static int sharp_panel_prepare(struct drm_panel *panel)
+{
+ struct sharp_panel *sharp = to_sharp_panel(panel);
+ struct device *dev = panel->dev;
+ struct mipi_dsi_device *dsi0 = sharp->dsi[0];
+ struct mipi_dsi_device *dsi1 = sharp->dsi[1];
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = NULL };
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(sharp_supplies),
sharp->supplies);
+ if (ret) {
+ dev_err(dev, "error enabling regulators (%d)\n", ret);
+ return ret;
+ }
+
+ msleep(24);
+
+ if (sharp->reset_gpio)
+ sharp_panel_reset(sharp);
+
+ msleep(32);
+
+ mipi_dsi_dual_dcs_write_seq_multi(dsi_ctx, dsi0, dsi1,
MIPI_DCS_EXIT_SLEEP_MODE);
+ mipi_dsi_msleep(&dsi_ctx, 120);
+
+ mipi_dsi_dual_dcs_write_seq_multi(dsi_ctx, dsi0, dsi1,
+ MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
0xff);
+ mipi_dsi_dual_dcs_write_seq_multi(dsi_ctx, dsi0, dsi1,
+ MIPI_DCS_WRITE_POWER_SAVE, 0x01);
+ mipi_dsi_dual_dcs_write_seq_multi(dsi_ctx, dsi0, dsi1,
+ MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x2c);
+
+ mipi_dsi_dual_dcs_write_seq_multi(dsi_ctx, dsi0, dsi1,
MIPI_DCS_SET_DISPLAY_ON);
+
+ return 0;
+}
+
+static int sharp_panel_unprepare(struct drm_panel *panel)
+{
+ struct sharp_panel *sharp = to_sharp_panel(panel);
+ struct mipi_dsi_device *dsi0 = sharp->dsi[0];
+ struct mipi_dsi_device *dsi1 = sharp->dsi[1];
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = NULL };
+
+ mipi_dsi_dual_dcs_write_seq_multi(dsi_ctx, dsi0, dsi1,
MIPI_DCS_SET_DISPLAY_OFF);
+ mipi_dsi_msleep(&dsi_ctx, 100);
+ mipi_dsi_dual_dcs_write_seq_multi(dsi_ctx, dsi0, dsi1,
MIPI_DCS_ENTER_SLEEP_MODE);
+ mipi_dsi_msleep(&dsi_ctx, 150);
+
+ gpiod_set_value_cansleep(sharp->reset_gpio, 1);
+
+ return regulator_bulk_disable(ARRAY_SIZE(sharp_supplies),
sharp->supplies);
+}
+
+static const struct drm_display_mode default_mode = {
+ .clock = (1536 + 136 + 28 + 28) * (2048 + 14 + 8 + 2) * 60 / 1000,
+ .hdisplay = 1536,
+ .hsync_start = 1536 + 136,
+ .hsync_end = 1536 + 136 + 28,
+ .htotal = 1536 + 136 + 28 + 28,
+ .vdisplay = 2048,
+ .vsync_start = 2048 + 14,
+ .vsync_end = 2048 + 14 + 8,
+ .vtotal = 2048 + 14 + 8 + 2,
+ .width_mm = 120,
+ .height_mm = 160,
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static int sharp_panel_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ return drm_connector_helper_get_modes_fixed(connector, &default_mode);
+}
+
+static const struct drm_panel_funcs sharp_panel_funcs = {
+ .unprepare = sharp_panel_unprepare,
+ .prepare = sharp_panel_prepare,
+ .get_modes = sharp_panel_get_modes,
+};
+
+static int sharp_panel_probe(struct mipi_dsi_device *dsi)
+{
+ const struct mipi_dsi_device_info info = { "sharp-link1", 0, NULL };
+ struct device *dev = &dsi->dev;
+ struct device_node *dsi_r;
+ struct mipi_dsi_host *dsi_r_host;
+ struct sharp_panel *sharp;
+ int i, ret;
+
+ sharp = devm_drm_panel_alloc(dev, struct sharp_panel, panel,
+ &sharp_panel_funcs,
DRM_MODE_CONNECTOR_DSI);
+ if (IS_ERR(sharp))
+ return PTR_ERR(sharp);
+
+ ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(sharp_supplies),
+ sharp_supplies, &sharp->supplies);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get supplies\n");
+
+ sharp->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_LOW);
+ if (IS_ERR(sharp->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(sharp->reset_gpio),
+ "failed to get reset GPIO\n");
+
+ /* Panel is always connected to two DSI hosts, DSI0 is left, DSI1 is
right */
+ dsi_r = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
+ if (!dsi_r)
+ return dev_err_probe(dev, -ENODEV, "failed to find second DSI
host node\n");
+
+ dsi_r_host = of_find_mipi_dsi_host_by_node(dsi_r);
+ of_node_put(dsi_r);
+ if (!dsi_r_host)
+ return dev_err_probe(dev, -EPROBE_DEFER, "cannot get secondary
DSI host\n");
+
+ sharp->dsi[1] = devm_mipi_dsi_device_register_full(dev, dsi_r_host,
&info);
+ if (IS_ERR(sharp->dsi[1]))
+ return dev_err_probe(dev, PTR_ERR(sharp->dsi[1]),
+ "second link registration failed\n");
+
+ sharp->dsi[0] = dsi;
+ mipi_dsi_set_drvdata(dsi, sharp);
+
+ ret = drm_panel_of_backlight(&sharp->panel);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+ drm_panel_add(&sharp->panel);
+
+ for (i = 0; i < ARRAY_SIZE(sharp->dsi); i++) {
+ if (!sharp->dsi[i])
+ continue;
+
+ sharp->dsi[i]->lanes = 4;
+ sharp->dsi[i]->format = MIPI_DSI_FMT_RGB888;
+ sharp->dsi[i]->mode_flags = MIPI_DSI_MODE_VIDEO |
MIPI_DSI_MODE_LPM;
+
+ ret = devm_mipi_dsi_attach(dev, sharp->dsi[i]);
+ if (ret < 0) {
+ drm_panel_remove(&sharp->panel);
+ return dev_err_probe(dev, ret, "failed to attach to
DSI%d\n", i);
+ }
+ }
+
+ return 0;
+}
+
+static void sharp_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi);
+
+ drm_panel_remove(&sharp->panel);
+}
+
+static const struct of_device_id sharp_of_match[] = {
+ { .compatible = "sharp,lq079l1sx01" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sharp_of_match);
+
+static struct mipi_dsi_driver sharp_panel_driver = {
+ .driver = {
+ .name = "panel-sharp-lq079l1sx01",
+ .of_match_table = sharp_of_match,
+ },
+ .probe = sharp_panel_probe,
+ .remove = sharp_panel_remove,
+};
+module_mipi_dsi_driver(sharp_panel_driver);
+
+MODULE_AUTHOR("Svyatoslav Ryhel <clamo...@gmail.com>");
+MODULE_DESCRIPTION("Sharp LQ079L1SX01 panel driver");
+MODULE_LICENSE("GPL");
--
2.48.1
