On Saturday, September 6, 2025 10:53 PM Svyatoslav Ryhel wrote:
> Tegra30 has CSI pad bits in both PLLD and PLLD2 clocks that are required
> for the correct work of the CSI block. Add CSI pad A and pad B clock gates
> with PLLD/PLLD2 parents, respectively. Add plld2 spinlock, like one plld
> has to be used for clock gate registration.
I might add a note that the spinlocks are needed since both the PLLDx and
CSIx_PAD clocks use the same registers.
In any case,
Reviewed-by: Mikko Perttunen <mperttu...@nvidia.com>
>
> Signed-off-by: Svyatoslav Ryhel <clamo...@gmail.com>
> ---
> drivers/clk/tegra/clk-tegra30.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
> index ca738bc64615..61fe527ee6c1 100644
> --- a/drivers/clk/tegra/clk-tegra30.c
> +++ b/drivers/clk/tegra/clk-tegra30.c
> @@ -154,6 +154,7 @@ static unsigned long input_freq;
>
> static DEFINE_SPINLOCK(cml_lock);
> static DEFINE_SPINLOCK(pll_d_lock);
> +static DEFINE_SPINLOCK(pll_d2_lock);
>
> #define TEGRA_INIT_DATA_MUX(_name, _parents, _offset, \
> _clk_num, _gate_flags, _clk_id) \
> @@ -859,7 +860,7 @@ static void __init tegra30_pll_init(void)
>
> /* PLLD2 */
> clk = tegra_clk_register_pll("pll_d2", "pll_ref", clk_base, pmc_base, 0,
> - &pll_d2_params, NULL);
> + &pll_d2_params, &pll_d2_lock);
> clks[TEGRA30_CLK_PLL_D2] = clk;
>
> /* PLLD2_OUT0 */
> @@ -1008,6 +1009,16 @@ static void __init tegra30_periph_clk_init(void)
> 0, 48, periph_clk_enb_refcnt);
> clks[TEGRA30_CLK_DSIA] = clk;
>
> + /* csia_pad */
> + clk = clk_register_gate(NULL, "csia_pad", "pll_d", CLK_SET_RATE_PARENT,
> + clk_base + PLLD_BASE, 26, 0, &pll_d_lock);
> + clks[TEGRA30_CLK_CSIA_PAD] = clk;
> +
> + /* csib_pad */
> + clk = clk_register_gate(NULL, "csib_pad", "pll_d2", CLK_SET_RATE_PARENT,
> + clk_base + PLLD2_BASE, 26, 0, &pll_d2_lock);
> + clks[TEGRA30_CLK_CSIB_PAD] = clk;
> +
> /* csus */
> clk = tegra_clk_register_periph_gate("csus", "vi_sensor", 0,
> clk_base, 0, TEGRA30_CLK_CSUS,
>
