On Wednesday, October 1, 2025 2:35 PM Svyatoslav Ryhel wrote:
> ср, 1 жовт. 2025 р. о 08:07 Svyatoslav Ryhel <[email protected]> пише:
> >
> > ср, 1 жовт. 2025 р. о 07:38 Mikko Perttunen <[email protected]> пише:
> > >
> > > On Friday, September 26, 2025 12:16 AM Svyatoslav Ryhel wrote:
> > > > Simplify format align calculations by slightly modifying supported
> > > > formats
> > > > structure. Adjusted U and V offset calculations for planar formats since
> > > > YUV420P bits per pixel is 12 (1 full plane for Y + 2 * 1/4 planes for U
> > > > and V) so stride is width * 3/2, but offset must be calculated with
> > > > plain
> > > > width since each plain has stride width * 1. This aligns with downstream
> > >
> > > plane
> > >
> > > > behavior which uses same approach for offset calculations.
> > > >
> > > > Signed-off-by: Svyatoslav Ryhel <[email protected]>
> > > > ---
> > > > drivers/staging/media/tegra-video/tegra20.c | 58 +++++++++------------
> > > > drivers/staging/media/tegra-video/vi.h | 3 +-
> > > > 2 files changed, 27 insertions(+), 34 deletions(-)
> > > >
> > > > diff --git a/drivers/staging/media/tegra-video/tegra20.c
> > > > b/drivers/staging/media/tegra-video/tegra20.c
> > > > index 7c3ff843235d..b7a39723dfc2 100644
> > > > --- a/drivers/staging/media/tegra-video/tegra20.c
> > > > +++ b/drivers/staging/media/tegra-video/tegra20.c
> > > > @@ -280,20 +280,8 @@ static void tegra20_fmt_align(struct
> > > > v4l2_pix_format *pix, unsigned int bpp)
> > > > pix->width = clamp(pix->width, TEGRA20_MIN_WIDTH,
> > > > TEGRA20_MAX_WIDTH);
> > > > pix->height = clamp(pix->height, TEGRA20_MIN_HEIGHT,
> > > > TEGRA20_MAX_HEIGHT);
> > > >
> > > > - switch (pix->pixelformat) {
> > > > - case V4L2_PIX_FMT_UYVY:
> > > > - case V4L2_PIX_FMT_VYUY:
> > > > - case V4L2_PIX_FMT_YUYV:
> > > > - case V4L2_PIX_FMT_YVYU:
> > > > - pix->bytesperline = roundup(pix->width, 2) * 2;
> > > > - pix->sizeimage = roundup(pix->width, 2) * 2 * pix->height;
> > > > - break;
> > > > - case V4L2_PIX_FMT_YUV420:
> > > > - case V4L2_PIX_FMT_YVU420:
> > > > - pix->bytesperline = roundup(pix->width, 8);
> > > > - pix->sizeimage = roundup(pix->width, 8) * pix->height * 3
> > > > / 2;
> > > > - break;
> > > > - }
> > > > + pix->bytesperline = DIV_ROUND_UP(pix->width * bpp, 8);
> > > > + pix->sizeimage = pix->bytesperline * pix->height;
> > > > }
> > > >
> > > > /*
> > > > @@ -305,6 +293,7 @@ static void tegra20_channel_queue_setup(struct
> > > > tegra_vi_channel *chan)
> > > > {
> > > > unsigned int stride = chan->format.bytesperline;
> > > > unsigned int height = chan->format.height;
> > > > + unsigned int width = chan->format.width;
> > > >
> > > > chan->start_offset = 0;
> > > >
> > > > @@ -321,8 +310,8 @@ static void tegra20_channel_queue_setup(struct
> > > > tegra_vi_channel *chan)
> > > >
> > > > case V4L2_PIX_FMT_YUV420:
> > > > case V4L2_PIX_FMT_YVU420:
> > > > - chan->addr_offset_u = stride * height;
> > > > - chan->addr_offset_v = chan->addr_offset_u + stride *
> > > > height / 4;
> > > > + chan->addr_offset_u = width * height;
> > > > + chan->addr_offset_v = chan->addr_offset_u + width *
> > > > height / 4;
> > > >
> > > > /* For YVU420, we swap the locations of the U and V
> > > > planes. */
> > > > if (chan->format.pixelformat == V4L2_PIX_FMT_YVU420)
> > > > @@ -332,14 +321,14 @@ static void tegra20_channel_queue_setup(struct
> > > > tegra_vi_channel *chan)
> > > > chan->start_offset_v = chan->addr_offset_v;
> > > >
> > > > if (chan->vflip) {
> > > > - chan->start_offset += stride * (height - 1);
> > > > - chan->start_offset_u += (stride / 2) * ((height /
> > > > 2) - 1);
> > > > - chan->start_offset_v += (stride / 2) * ((height /
> > > > 2) - 1);
> > > > + chan->start_offset += width * (height - 1);
> > > > + chan->start_offset_u += (width / 2) * ((height /
> > > > 2) - 1);
> > > > + chan->start_offset_v += (width / 2) * ((height /
> > > > 2) - 1);
> > > > }
> > > > if (chan->hflip) {
> > > > - chan->start_offset += stride - 1;
> > > > - chan->start_offset_u += (stride / 2) - 1;
> > > > - chan->start_offset_v += (stride / 2) - 1;
> > > > + chan->start_offset += width - 1;
> > > > + chan->start_offset_u += (width / 2) - 1;
> > > > + chan->start_offset_v += (width / 2) - 1;
> > > > }
> > > > break;
> > > > }
> > > > @@ -576,20 +565,23 @@ static const struct tegra_vi_ops tegra20_vi_ops =
> > > > {
> > > > .vi_stop_streaming = tegra20_vi_stop_streaming,
> > > > };
> > > >
> > > > -#define TEGRA20_VIDEO_FMT(MBUS_CODE, BPP, FOURCC) \
> > > > -{ \
> > > > - .code = MEDIA_BUS_FMT_##MBUS_CODE, \
> > > > - .bpp = BPP, \
> > > > - .fourcc = V4L2_PIX_FMT_##FOURCC, \
> > > > +#define TEGRA20_VIDEO_FMT(DATA_TYPE, BIT_WIDTH, MBUS_CODE, BPP,
> > > > FOURCC) \
> > > > +{ \
> > > > + .img_dt = TEGRA_IMAGE_DT_##DATA_TYPE, \
> > > > + .bit_width = BIT_WIDTH, \
> > > > + .code = MEDIA_BUS_FMT_##MBUS_CODE, \
> > > > + .bpp = BPP, \
> > > > + .fourcc = V4L2_PIX_FMT_##FOURCC, \
> > > > }
> > > >
> > > > static const struct tegra_video_format tegra20_video_formats[] = {
> > > > - TEGRA20_VIDEO_FMT(UYVY8_2X8, 2, UYVY),
> > > > - TEGRA20_VIDEO_FMT(VYUY8_2X8, 2, VYUY),
> > > > - TEGRA20_VIDEO_FMT(YUYV8_2X8, 2, YUYV),
> > > > - TEGRA20_VIDEO_FMT(YVYU8_2X8, 2, YVYU),
> > > > - TEGRA20_VIDEO_FMT(UYVY8_2X8, 1, YUV420),
> > > > - TEGRA20_VIDEO_FMT(UYVY8_2X8, 1, YVU420),
> > > > + /* YUV422 */
> > > > + TEGRA20_VIDEO_FMT(YUV422_8, 16, UYVY8_2X8, 16, UYVY),
> > > > + TEGRA20_VIDEO_FMT(YUV422_8, 16, VYUY8_2X8, 16, VYUY),
> > > > + TEGRA20_VIDEO_FMT(YUV422_8, 16, YUYV8_2X8, 16, YUYV),
> > > > + TEGRA20_VIDEO_FMT(YUV422_8, 16, YVYU8_2X8, 16, YVYU),
> > > > + TEGRA20_VIDEO_FMT(YUV422_8, 16, UYVY8_2X8, 12, YUV420),
> > > > + TEGRA20_VIDEO_FMT(YUV422_8, 16, UYVY8_2X8, 12, YVU420),
> > > > };
> > >
> > > Looking at the code, BPP seems to only be used for the line stride (i.e.
> > > bytes per line) calculation. I think we should just make it 8 for the
> > > planar formats (possibly with an explaining comment). With the current
> > > code, we end up with 'bytesperline' variables in places not being the
> > > actual bytes per line, which is confusing.
> > >
> > > Actually, we can then just make the 'bpp' field be bytes per pixel as it
> > > was before to avoid the discrepancy with Tegra210.
> > >
> >
> > No, this code is actually cleaner and in sync with what downstream
> > does, Tegra210 bytes per pixel is confusing since it totally neglects
> > formats with fractional bytes per pixel, it is impossible to set there
> > 3/2 for example, which is used by YUV420.
> >
> > According to downstream code bytes_per_line =
> > soc_mbus_bytes_per_line..., downstream directly name is bytes_per_line
> > and soc_mbus_bytes_per_line returns width * 3 / 2 which is correct
> > calculation (12 bits). Meanwhile for planar formats Tegra has 3
> > different buffers so with offset calculation plain width must be used
> > (which matches downstream).
> >
>
> If you mean use of BPP by VI, I can propose removing bytesperline and
> sizeimage configuration from VI entirely and leave this to per-SoC
> fmt_align function which does this already anyway and guards every
> time those values are referred. This way there will be no instances
> where "places not being the actual bytes per line" comes true.
Without trying myself, I'm not sure what approach is the cleanest. In any case,
the downstream code is just wrong (or incorrectly named), so we shouldn't defer
to it in this matter. I don't see a reason to keep the value '12' either if it
doesn't serve any purpose (admittedly if we changed it to 8 or 1, 'bpp' would
be a confusing name for it, but explainable with a comment and improve-able
later) I don't mind having an if/switch statement for the planar formats to use
a '8' as multiplier instead of '12' if we need to keep the '12'. But the main
thing I want to avoid is a bytesperline/stride variable that isn't the line
stride in bytes.
>
> > > >
> > > > const struct tegra_vi_soc tegra20_vi_soc = {
> > > > diff --git a/drivers/staging/media/tegra-video/vi.h
> > > > b/drivers/staging/media/tegra-video/vi.h
> > > > index bfadde8858d4..5cbc0606ed6c 100644
> > > > --- a/drivers/staging/media/tegra-video/vi.h
> > > > +++ b/drivers/staging/media/tegra-video/vi.h
> > > > @@ -281,7 +281,8 @@ enum tegra_image_dt {
> > > > * @img_dt: MIPI CSI-2 data type (for CSI-2 only)
> > > > * @bit_width: format width in bits per component (for CSI/Tegra210
> > > > only)
> > > > * @code: media bus format code
> > > > - * @bpp: bytes per pixel (when stored in memory)
> > > > + * @bpp: bytes per pixel (when stored in memory) for Tegra210,
> > > > + * bits per pixel for Tegra20/Tegra30
> > > > * @img_fmt: image format (for CSI/Tegra210 only)
> > > > * @fourcc: V4L2 pixel format FCC identifier
> > > > */
> > > >
