Hi,
On 9/3/25 10:52 PM, Cristian Ciocaltea wrote:
> Hello Heiko,
>
> On 9/3/25 9:50 PM, Cristian Ciocaltea wrote:
>> The first patch in the series implements the CEC capability of the
>> Synopsys DesignWare HDMI QP TX controller found in RK3588 & RK3576 Socs.
>> This is based on the downstream code, but rewritten on top of the CEC
>> helpers added recently to the DRM HDMI connector framework.
>>
>> The second patch is needed for RK3576 in order to fixup the timer base
>> setup according to the actual reference clock rate, which differs
>> slightly from RK3588.
>>
>> The following three patches setup platform data with the new information
>> expected by the HDMI QP transmitter library, while improving the error
>> handling in the probe path.
>>
>> Please note the CEC helpers were affected by a resource deallocation
>> issue which could crash the kernel and freeze the system under certain
>> test conditions. This has been already fixed in v6.17-rc1 via commit
>> 19920ab98e17 ("drm/display: hdmi-cec-helper: Fix adapter
>> unregistration").
>>
>> Signed-off-by: Cristian Ciocaltea <[email protected]>
>> ---
>> Changes in v4:
>> - Fixed the bisect-related issues reported by Daniel by implementing
>> the following operations in dw_hdmi_qp_bind():
>> * Disable CEC support when the related IRQ is not available
>> * Set ref_clk_rate to vendor default in case it was not provided by
>> the platform driver
>> * In both scenarios, also print a warning message to highlight the
>> need for fixing the platform driver
>> - Simplified dw_hdmi_qp_cec_init() a bit
>> * Removed the now obsolete cec->irq validation test
>> * Removed the superfluous error checking and logging around
>> devm_request_threaded_irq() call (it already handles all that)
>> - Collected R-b tags from Daniel
>> - Rebased series onto next-20250903
>
> I forgot to mention that luckily there are no conflicts with the patches
> introducing the hw-specific bitfield operations in next-20250903, which this
> revision is based on.
>
> I verified the series still applies cleanly onto drm-misc-next, while commit
> ad24f6e10a5f ("drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro")
> responsible for the macro conversion can be further cherry-picked without
> issues on top of all that. The resulting file content of
> drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c is identical to what's
> expected after applying this patch set onto next-20250903.
Could we get this merged, please? This would unblock some other patchsets
conflicting with it.
I've just checked and it applies cleanly on top of v6.18-rc1. Also seems to work
fine, at least I haven't noticed any regressions so far.
Thanks,
Cristian
