On Thu, Oct 09, 2025 at 08:48:25AM +0200, Maud Spierings via B4 Relay wrote: > From: Maud Spierings <[email protected]>
Subject needn't double bindings. dt-bindings: backlight: Add max25014 support > > The Maxim MAX25014 is a 4-channel automotive grade backlight driver IC > with integrated boost controller. > > In the current implementation the control registers for channel 1, > control all channels. So only one led subnode with led-sources is > supported right now. If at some point the driver functionality is > expanded the bindings can be easily extended with it. Need descript hardware, not driver. Need descript full functions even though driver have not implement yet. > > Signed-off-by: Maud Spierings <[email protected]> > --- > .../bindings/leds/backlight/maxim,max25014.yaml | 109 > +++++++++++++++++++++ > MAINTAINERS | 5 + > 2 files changed, 114 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/leds/backlight/maxim,max25014.yaml > b/Documentation/devicetree/bindings/leds/backlight/maxim,max25014.yaml > new file mode 100644 > index 0000000000000..496520e1374e5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/backlight/maxim,max25014.yaml > @@ -0,0 +1,109 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/backlight/maxim,max25014.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Maxim max25014 backlight controller > + > +maintainers: > + - Maud Spierings <[email protected]> > + > +properties: > + compatible: > + enum: > + - maxim,max25014 > + > + reg: > + maxItems: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + enable-gpios: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + power-supply: > + description: Regulator which controls the boost converter input rail. > + > + pwms: > + maxItems: 1 > + > + maxim,iset: > + $ref: /schemas/types.yaml#/definitions/uint32 > + maximum: 15 > + default: 11 > + description: > + Value of the ISET register field. This controls the current scale of > the > + outputs, a higher number means more current. Can't use register value directly, need use standard unit. or percentage 100: means max, 0: min. > + > +patternProperties: > + "^led@[01]$": > + type: object > + description: Properties for a string of connected LEDs. > + $ref: common.yaml# > + > + properties: > + reg: > + const: 0 > + > + led-sources: > + allOf: > + - minItems: 1 > + maxItems: 4 > + items: > + minimum: 0 > + maximum: 3 > + default: [0, 1, 2, 3] > + > + default-brightness: > + minimum: 0 > + maximum: 100 > + default: 50 > + > + required: > + - reg > + > + additionalProperties: false there are $ref, should use unevaluatedProperties: false Frank > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + backlight@6f { > + compatible = "maxim,max25014"; > + reg = <0x6f>; > + enable-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; > + interrupt-parent = <&gpio1>; > + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; > + power-supply = <®_backlight>; > + pwms = <&pwm1>; > + maxim,iset = <7>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + led@0 { > + reg = <0>; > + led-sources = <0 1 2 3>; > + default-brightness = <50>; > + }; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index 47fbc5e06808f..be5e2515900ce 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -15171,6 +15171,11 @@ F: > Documentation/userspace-api/media/drivers/max2175.rst > F: drivers/media/i2c/max2175* > F: include/uapi/linux/max2175.h > > +MAX25014 BACKLIGHT DRIVER > +M: Maud Spierings <[email protected]> > +S: Maintained > +F: Documentation/devicetree/bindings/leds/backlight/maxim,max25014.yaml > + > MAX31335 RTC DRIVER > M: Antoniu Miclaus <[email protected]> > L: [email protected] > > -- > 2.51.0 > >
