Dmitry Baryshkov <[email protected]> 于2025年9月25日周四 03:10写道： > > On Wed, Sep 24, 2025 at 11:08:10PM +0800, Jun Nie wrote: > > Some panels support multiple slice to be sent in a single DSC packet. And > > s/support/require/ > > If the panel supports something, then we can omit that and send 1 slice > as we currently do. If the panel requires multiple slices, it's > mandatory. > > > this feature is a must for specific panels, such as JDI LPM026M648C. Add a > > A panel driver which executes this API is appreciated. Otherwise in a > few months / years somebody will submit a patch 'field foo is not used > by the kernel drivers, drop it'.
OK, will add a panel driver in next version. > > > dsc_slice_per_pkt member into struct mipi_dsi_device and support the > > feature in msm mdss driver. > > > > Co-developed-by: Jonathan Marek <[email protected]> > > Signed-off-by: Jonathan Marek <[email protected]> > > Signed-off-by: Jun Nie <[email protected]> > > --- > > drivers/gpu/drm/msm/dsi/dsi_host.c | 25 ++++++++++--------------- > > include/drm/drm_mipi_dsi.h | 2 ++ > > 2 files changed, 12 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c > > b/drivers/gpu/drm/msm/dsi/dsi_host.c > > index > > f297e3de8c3dc4e1326e70c78c046b5a19568cef..de51cb02f267205320c5a94fc4188413e05907e6 > > 100644 > > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c > > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c > > @@ -157,6 +157,7 @@ struct msm_dsi_host { > > > > struct drm_display_mode *mode; > > struct drm_dsc_config *dsc; > > + unsigned int dsc_slice_per_pkt; > > > > /* connected device info */ > > unsigned int channel; > > @@ -849,17 +850,10 @@ static void dsi_update_dsc_timing(struct msm_dsi_host > > *msm_host, bool is_cmd_mod > > slice_per_intf = dsc->slice_count; > > > > total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf; > > - bytes_per_pkt = dsc->slice_chunk_size; /* * slice_per_pkt; */ > > + bytes_per_pkt = dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt; > > > > eol_byte_num = total_bytes_per_intf % 3; > > - > > - /* > > - * Typically, pkt_per_line = slice_per_intf * slice_per_pkt. > > - * > > - * Since the current driver only supports slice_per_pkt = 1, > > - * pkt_per_line will be equal to slice per intf for now. > > - */ > > - pkt_per_line = slice_per_intf; > > + pkt_per_line = slice_per_intf / msm_host->dsc_slice_per_pkt; > > > > if (is_cmd_mode) /* packet data type */ > > reg = > > DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE); > > @@ -1008,12 +1002,8 @@ static void dsi_timing_setup(struct msm_dsi_host > > *msm_host, bool is_bonded_dsi) > > else > > /* > > * When DSC is enabled, WC = slice_chunk_size * > > slice_per_pkt + 1. > > - * Currently, the driver only supports default value > > of slice_per_pkt = 1 > > - * > > - * TODO: Expand mipi_dsi_device struct to hold > > slice_per_pkt info > > - * and adjust DSC math to account for > > slice_per_pkt. > > */ > > - wc = msm_host->dsc->slice_chunk_size + 1; > > + wc = msm_host->dsc->slice_chunk_size * > > msm_host->dsc_slice_per_pkt + 1; > > > > dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL, > > DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) | > > @@ -1623,8 +1613,13 @@ static int dsi_host_attach(struct mipi_dsi_host > > *host, > > msm_host->lanes = dsi->lanes; > > msm_host->format = dsi->format; > > msm_host->mode_flags = dsi->mode_flags; > > - if (dsi->dsc) > > + if (dsi->dsc) { > > msm_host->dsc = dsi->dsc; > > + msm_host->dsc_slice_per_pkt = dsi->dsc_slice_per_pkt; > > + /* for backwards compatibility, assume 1 if not set */ > > + if (!msm_host->dsc_slice_per_pkt) > > + msm_host->dsc_slice_per_pkt = 1; > > msm_host->dsc_slice_per_pkt = dsi->dsc_slice_per_pkt ?: 1; > > Yes, I think it's more ideomatic. Will add the change. > > > + } > > > > ret = dsi_dev_attach(msm_host->pdev); > > if (ret) > > diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h > > index > > 6d2c08e8110151a97620389197f1ef79c058329d..5a85ba01f402a3866b70828391bb417bb8dd5956 > > 100644 > > --- a/include/drm/drm_mipi_dsi.h > > +++ b/include/drm/drm_mipi_dsi.h > > @@ -182,6 +182,7 @@ struct mipi_dsi_device_info { > > * be set to the real limits of the hardware, zero is only accepted for > > * legacy drivers > > * @dsc: panel/bridge DSC pps payload to be sent > > + * @dsc_slice_per_pkt: number of DSC slices to be sent as in a single > > packet > > s/as // Will do. > > > */ > > struct mipi_dsi_device { > > struct mipi_dsi_host *host; > > @@ -196,6 +197,7 @@ struct mipi_dsi_device { > > unsigned long hs_rate; > > unsigned long lp_rate; > > struct drm_dsc_config *dsc; > > + unsigned int dsc_slice_per_pkt; > > Why is it a part of the DSI device config? What if a device specifies > dsc_slice_per_pkt, but not DSC config? What are the legit boundaries for > this field? You are right. drm_dsc_config is better place to add the info. Thus only panels that support DSC can convey the info to host. > > > }; > > > > /** > > > > -- > > 2.34.1 > > > > -- > With best wishes > Dmitry
