Hi
Am 22.10.25 um 11:16 schrieb Peter Schneider:
Am 22.10.2025 um 11:11 schrieb Thomas Zimmermann:
Hi
Am 22.10.25 um 10:08 schrieb Peter Schneider:
Your patch applied cleanly against 6.18-rc2 and the kernel built
fine, but unfortunately it did not solve the issue: my console
screen stays blank after booting. This is regardless whether I do a
soft reboot, press the reset button or power cycle and do a cold
boot. They are all the same.
Just to be sure: you do see output at the early boot stages (BIOS,
boot loader). It's at some later point during boot, the driver loads
and the display blanks out?
Yes, that's correct.
There's another patch attached. does this make a difference?
Do I have to apply that against base 6.18-rc2 or against 6.18-rc2 +
your previous patch?
Base 6.18-rc2. All the patches are against this.
Best regards
Thomas
Beste Grüße,
Peter Schneider
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
