Hello all,
I run in the same problem as lot of other people since a longer time. The edid reported by my external monitor is no longer accepted and only resolutions up to 1024x768 are possible (supported by hardware: 1920x1200). It seems the kernel drm module gained a strict check of the edid delived by the monitor. The kernel logs shows: [ 7.172357] [drm] Initialized nouveau 1.4.0 for 0000:01:00.0 on minor 0 [ 7.356212] EDID block 0 (tag 0x00) checksum is invalid, remainder is 210 [ 7.356220] [00] BAD 00 ff ff ff ff ff ff 00 a1 ff a0 46 a1 ff a0 4a [ 7.356221] [00] BAD d0 ff 01 50 ff ff 20 78 2a 5a d5 a7 56 4b 9b 24 [ 7.356222] [00] BAD 13 50 54 ff 08 00 81 00 81 80 95 00 a9 40 b3 00 [ 7.356223] [00] BAD 8b c0 d0 9b a1 ff a0 9c a1 ff a0 9d a1 ff a0 9e [ 7.356224] [00] BAD a1 ff a0 ff ff ff a0 ac a1 ff a0 ad a1 ff a1 ff [ 7.356225] [00] BAD 50 ff ff 9e a1 ff a0 9f a1 ff a0 a0 a1 ff a0 a1 [ 7.356226] [00] BAD d0 ff a0 ff a0 ae b0 ff d0 ff ff ff d0 ff ff ff [ 7.356227] [00] BAD a0 ad a1 d0 ff ff 20 50 ff 20 20 50 ff ff 50 ff [ 7.356232] nouveau 0000:01:00.0: drm: DDC responded, but no EDID for VGA-1 (the monitor is a 24” Yuraku MB24WKH, product number: Yur.Vision YV24WBH1) After seaching the net, I found that a lot of people have this problem. It would be nice to have a new kernel parameter of the drm module as proposed by Alex called "edid_strict" (https://lists.freedesktop.org/archives/dri-devel/2011-January/ 006778.html[1]). Set the param to “0” will disable the check and let accept the edid reported by the monitor. The only workaround to get the higher resolution working is to provide a edid firmware file using the parameter “edid_firmware”. This needs to be created manually and build into the initrd to be available early at runtime. I think the workaround isn’t very user friendly. Putting a flag to disable the edid strict check would help more people get their moditors more easy runnning by their own responsibilty. At a later time I think a solution for controlling the edid check at runtime should be made possible, so that desktop environmens like KDE can implement an manually override by specifying a firmware file or disable the the edid check. References: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/712075[2] https://lists.freedesktop.org/archives/dri-devel/2011-January/006778.html[1] Monitor edid: monitor-get-edid | hexdump 0000000 ff00 ffff ffff 00ff e430 025a 0000 0000 0000010 1300 0401 2595 7817 4402 9c75 5459 2796 0000020 5023 0054 0000 0101 0101 0101 0101 0101 0000030 0101 0101 0101 37c8 6480 b070 400f 2022 0000040 0036 e672 0010 1a00 283c a080 b070 4023 0000050 2030 0036 e672 0010 1a00 0000 fe00 4800 0000060 3830 5236 3182 3137 5557 0a37 0000 0000 0000070 0000 3141 001e 0000 0600 0a01 2020 2300 0000080 monitor-get-edid | monitor-parse-edid EISA ID: LGD025a EDID version: 1.4 EDID extension blocks: 0 Screen size: 37.0 cm x 23.0 cm (17.15 inches, aspect ratio 16/10 = 1.61) Gamma: 2.2 Digital signal # Monitor preferred modeline (58.2 Hz vsync, 70.7 kHz hsync, ratio 16/10, 131 dpi) ModeLine "1920x1200" 142.8 1920 1954 1986 2020 1200 1203 1209 1215 -hsync +vsync # Monitor supported modeline (40.1 Hz vsync, 49.5 kHz hsync, ratio 16/10, 131 dpi) ModeLine "1920x1200" 103 1920 1968 2000 2080 1200 1203 1209 1235 -hsync +vsync With best regards Christoph -- -------- [1] https://lists.freedesktop.org/archives/dri-devel/2011-January/006778.html [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/712075
signature.asc
Description: This is a digitally signed message part.
