On Fri, Nov 14, 2025 at 08:06:27PM +0530, Rahul Kumar wrote:
> Replace DRM_DEBUG() and DRM_ERROR() calls in
> drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c with the
> drm_dbg() and drm_err() helpers in functions where a drm_device
> parameter is available.
> 
> The drm_*() logging macros require a struct drm_device * parameter,
> which allows the DRM core to prefix log messages with the device
> instance. This improves debugging clarity when multiple Komeda or
> other DRM devices are present.
> 
> Logging in early hardware probing functions such as d71_identify()
> is intentionally left unchanged because they do not have access to
> a drm_device pointer at that stage of initialization.
> 
> This conversion follows the DRM TODO entry:
> "Convert logging to drm_* functions with drm_device parameter".

Hi Rahul,

It would've been nice if these patches were collected in a series.


> 
> Signed-off-by: Rahul Kumar <[email protected]>
> ---
>  .../gpu/drm/arm/display/komeda/d71/d71_dev.c  | 21 ++++++++++++-------
>  1 file changed, 14 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c 
> b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
> index 80973975bfdb..4305354badc8 100644
> --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
> +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
> @@ -9,6 +9,7 @@
>  #include <drm/drm_print.h>
>  #include "d71_dev.h"
>  #include "malidp_io.h"
> +#include "komeda_kms.h"
>  
>  static u64 get_lpu_event(struct d71_pipeline *d71_pipeline)
>  {
> @@ -348,6 +349,8 @@ static void d71_cleanup(struct komeda_dev *mdev)
>  
>  static int d71_enum_resources(struct komeda_dev *mdev)
>  {
> +     struct komeda_kms_dev *kms = dev_get_drvdata(mdev->dev);

I've made a mistake when I've reviewed the previous patch but it applies here 
too:

dev_get_drvdata(mdev->dev) is going to give you a struct komeda_drv pointer,
because that is what we set it to in komeda_platform_probe(). So this patch
and the previous one for komeda_pipeline.c are invalid and need a respin.

Best regards,
Liviu


> +     struct drm_device *drm = &kms->base;
>       struct d71_dev *d71;
>       struct komeda_pipeline *pipe;
>       struct block_header blk;
> @@ -366,7 +369,7 @@ static int d71_enum_resources(struct komeda_dev *mdev)
>  
>       err = d71_reset(d71);
>       if (err) {
> -             DRM_ERROR("Fail to reset d71 device.\n");
> +             drm_err(drm, "Fail to reset d71 device.\n");
>               goto err_cleanup;
>       }
>  
> @@ -376,8 +379,8 @@ static int d71_enum_resources(struct komeda_dev *mdev)
>       d71->num_pipelines = (value >> 8) & 0x7;
>  
>       if (d71->num_pipelines > D71_MAX_PIPELINE) {
> -             DRM_ERROR("d71 supports %d pipelines, but got: %d.\n",
> -                       D71_MAX_PIPELINE, d71->num_pipelines);
> +             drm_err(drm, "d71 supports %d pipelines, but got: %d.\n",
> +                     D71_MAX_PIPELINE, d71->num_pipelines);
>               err = -EINVAL;
>               goto err_cleanup;
>       }
> @@ -455,8 +458,8 @@ static int d71_enum_resources(struct komeda_dev *mdev)
>               offset += D71_BLOCK_SIZE;
>       }
>  
> -     DRM_DEBUG("total %d (out of %d) blocks are found.\n",
> -               i, d71->num_blocks);
> +     drm_dbg(drm, "total %d (out of %d) blocks are found.\n",
> +             i, d71->num_blocks);
>  
>       return 0;
>  
> @@ -555,6 +558,8 @@ static void d71_init_fmt_tbl(struct komeda_dev *mdev)
>  
>  static int d71_connect_iommu(struct komeda_dev *mdev)
>  {
> +     struct komeda_kms_dev *kms = dev_get_drvdata(mdev->dev);
> +     struct drm_device *drm = &kms->base;
>       struct d71_dev *d71 = mdev->chip_data;
>       u32 __iomem *reg = d71->gcu_addr;
>       u32 check_bits = (d71->num_pipelines == 2) ?
> @@ -569,7 +574,7 @@ static int d71_connect_iommu(struct komeda_dev *mdev)
>       ret = dp_wait_cond(has_bits(check_bits, malidp_read32(reg, BLK_STATUS)),
>                       100, 1000, 1000);
>       if (ret < 0) {
> -             DRM_ERROR("timed out connecting to TCU!\n");
> +             drm_err(drm, "timed out connecting to TCU!\n");
>               malidp_write32_mask(reg, BLK_CONTROL, 0x7, INACTIVE_MODE);
>               return ret;
>       }
> @@ -582,6 +587,8 @@ static int d71_connect_iommu(struct komeda_dev *mdev)
>  
>  static int d71_disconnect_iommu(struct komeda_dev *mdev)
>  {
> +     struct komeda_kms_dev *kms = dev_get_drvdata(mdev->dev);
> +     struct drm_device *drm = &kms->base;
>       struct d71_dev *d71 = mdev->chip_data;
>       u32 __iomem *reg = d71->gcu_addr;
>       u32 check_bits = (d71->num_pipelines == 2) ?
> @@ -593,7 +600,7 @@ static int d71_disconnect_iommu(struct komeda_dev *mdev)
>       ret = dp_wait_cond(((malidp_read32(reg, BLK_STATUS) & check_bits) == 0),
>                       100, 1000, 1000);
>       if (ret < 0) {
> -             DRM_ERROR("timed out disconnecting from TCU!\n");
> +             drm_err(drm, "timed out disconnecting from TCU!\n");
>               malidp_write32_mask(reg, BLK_CONTROL, 0x7, INACTIVE_MODE);
>       }
>  
> -- 
> 2.43.0
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯

Reply via email to