On 15/11/2025 02:03, Vishnu Saini wrote: > Add bindings for lt8713sx. > > Signed-off-by: Vishnu Saini <[email protected]> > Co-developed-by: Prahlad Valluru <[email protected]> > Signed-off-by: Prahlad Valluru <[email protected]>
Incomplete or incorrectly ordered DCO chain. Please read submitting patches so you understand what you have to certify. > --- > Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml | 47 > +++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 47 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml > b/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml > new file mode 100644 > index 000000000000..3292e149706c > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml > @@ -0,0 +1,47 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8713sx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Lontium LT8713SX Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0/DP++ bridge-hub > + > +maintainers: > + - Tony <[email protected]> > + > +description: | Do not need '|' unless you need to preserve formatting. > + The Lontium LT8713SX is a Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0 converter > + that integrates one DP input and up to three configurable output interfaces > + (DP1.4 / HDMI2.0 / DP++), with SST/MST functionality and audio support. > + > +properties: > + compatible: > + enum: > + - lontium,lt8713sx > + > + reg: > + maxItems: 1 > + description: I2C address of the device. Drop description, obvious thus redundant. > + > + reset-gpios: > + description: GPIO connected to active high RESET pin. > + Missing ports, supply. > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + i2c0 { i2c > + #address-cells = <1>; > + #size-cells = <0>; > + bridge@4f { > + compatible = "lontium,lt8713sx"; > + reg = <0x4f>; > + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; > + }; > + }; > Best regards, Krzysztof
