On Thu, Nov 20, 2025 at 02:25:01PM +0530, Mani Chandana Kuntumalla wrote: > > > On 10/8/2025 6:10 PM, Konrad Dybcio wrote: > > On 9/26/25 10:59 AM, Mani Chandana Ballary Kuntumalla wrote: > > > Add device tree nodes for the mdss1 DPTX0 and DPTX1 controllers > > > with their corresponding PHYs. > > > > > > Signed-off-by: Mani Chandana Ballary Kuntumalla > > > <[email protected]> > > > --- > > > > [...] > > > > > + mdss1_dp0: displayport-controller@22154000 { > > > + compatible = "qcom,sa8775p-dp"; > > > + > > > + reg = <0x0 0x22154000 0x0 0x104>, > > > > sz = 0x200 > > > > > + <0x0 0x22154200 0x0 0x0c0>, > > > > sz = 0x200 > > > > > + <0x0 0x22155000 0x0 0x770>, > > > > sz = 0xc00> + <0x0 0x22156000 0x0 > > 0x09c>, > > > + <0x0 0x22157000 0x0 0x09c>, > > > + <0x0 0x22158000 0x0 0x09c>, > > > + <0x0 0x22159000 0x0 0x09c>, > > > > sz = 0x400 for all 0x9c > > > > > + <0x0 0x2215a000 0x0 0x23c>, > > > + <0x0 0x2215b000 0x0 0x23c>; > > > > 0x23c -> 0x600 > > > > [...] > > > > > > > + mdss1_dp1: displayport-controller@2215c000 { > > > + compatible = "qcom,sa8775p-dp"; > > > + > > > + reg = <0x0 0x2215c000 0x0 0x104>, > > > + <0x0 0x2215c200 0x0 0x0c0>, > > > + <0x0 0x2215d000 0x0 0x770>, > > > + <0x0 0x2215e000 0x0 0x09c>, > > > + <0x0 0x2215f000 0x0 0x09c>, > > > + <0x0 0x22160000 0x0 0x09c>, > > > + <0x0 0x22161000 0x0 0x09c>, > > > + <0x0 0x22162000 0x0 0x23c>, > > > + <0x0 0x22163000 0x0 0x23c>; > > > > 0x2216_2000 and _3000 don't exist, there's no MST2/3 > > > > sizes should be changed similarly > > MST2/3 is supported for MDSS1 DPTX0.
This is MDSS1 DPTX1 -- With best wishes Dmitry
