Vinod, Please let me know if there's anything pending on my side to get this patch applied.
On 9/26/2025 3:25 PM, Xiangxu Yin wrote: > This series aims to extend the USB-C PHY to support DP mode and enable > DisplayPort on the Qualcomm QCS615 platform. > > The devicetree modification for DisplayPort on QCS615 will be provided > in a future patch. > > Signed-off-by: Xiangxu Yin <[email protected]> > --- > Changes in v7: > - Fix QSERDES_V2_TX_LANE_MODE_1 configuration from COM init table to > configure_dp_tx(). > - Link to v6: > https://lore.kernel.org/r/20250925-add-displayport-support-for-qcs615-platform-v6-0-419fe5963...@oss.qualcomm.com > > Changes in v6: > - Move usb3dpphy_reset_l definition to the patch adding compatible and > related config data. [Dmitry] > - Add NOTE about SW_PORTSELECT/orientation handling. [Dmitry] > - Use C99-style loop variable declaration in msm_dp_link_lane_map. [Rob] > - Update commit msg with issue description for [05/14, 06/14, 07/14，12/14]. > - Link to v5: > https://lore.kernel.org/r/20250919-add-displayport-support-for-qcs615-platform-v5-0-eae6681f4...@oss.qualcomm.com > > Changes in v5: > - Add new patch to introduce QSERDES v2 COM/TXRX register headers. > - Restore legacy reset & clock register logic. [Dmitry] > - Update phy_xlate() to return ERR_PTR(-ENODEV) when dp_phy is NULL. [Dmitry] > - Rename helper from qmp_check_mutex_phy() to qmp_usbc_check_phy_status(). > [Dmitry] > - Drop storing struct device *dev in dp_link as it is only used once. [Dmitry] > - Add robust lane mapping: default 1:1, complete partial configs. [Dmitry] > - Reorganize sub-patches v5[07/14， 08/14, 11/14， 12/14] as suggested. > - Link to v4: > https://lore.kernel.org/all/20250911-add-displayport-support-for-qcs615-platform-v4-0-2702bdda1...@oss.qualcomm.com/ > > Changes in v4: > - Drop patch v3[01/14 & 13/14], will sutbmit new patchsets based mst dt > binding series. > - Update maintainer of qcom,qcs615-qmp-usb3dp-phy.yaml to myself. > - Add missing aux and pipe clocks. [Dmitry] > - Drop second TCSR phandle; register offsets are described directly. [Dmitry] > - Add USBC PHY series related init_load_uA configs. [Dmitry] > - Drop v3[04/14] qmp_phy_usbc_type define and use dp_serdes offsets to > confirm DP capability [Dmitry] > - Reorganize sub-patches as suggested. > - Link to v3: > https://lore.kernel.org/all/20250820-add-displayport-support-for-qcs615-platform-v3-0-a43bd25ec...@oss.qualcomm.com/ > > Changes in v3: > - Renamed qcom,qcs615-qmp-dp-phy.yaml in v2 to qcom,qcs615-qmp-dp-phy.yaml in > v3 for QCS615 USB3+DP PHY. > - Updated patch v3[02/14] to revise binding title, description, and property > order. [Krzysztof] > - Updated commit messages in patch v3[01/14] and [13/14] to reflect the DTSI > rename and clarify compatibility. [Krzysztof] > - Added USB3+DP mode implementation in patches v3 [003–012], organized in > logical chunks. [Dmitry] > - Dropped patch v2[03/13] to maintain full backward compatibility with USBC. > - Link to v2: > https://lore.kernel.org/all/20250722-add-displayport-support-for-qcs615-platform-v2-0-42b403717...@oss.qualcomm.com/ > > Changes in v2: > - Add new binding qcom,qcs615-qmp-dp-phy.yaml for QCS615 standalone DP > - Split DP PHY driver into patches 4-11 by logical chunks [Dmitry] > - Update DP PHY configuration flow to align with QMP Combo PHY implementation > [Dmitry] > - Update all hex values to lowercase [Dmitry] > - Remove redundant comments in DP PHY driver [Krzysztof] > - Remove invalid USBC type define [Dmitry] > - Move lane_map， max_dp_lanes， max_dp_link_rate parsing logic to dp_link > [Dmitry] > - Add TCSR-based mutex logic for DP and USB PHY coexistence [Dmitry] > - Drop patches 6–8 and remove related binding properties as rejected upstream > - Link to v1: > https://lore.kernel.org/all/20241129-add-displayport-support-for-qcs615-platform-v1-0-09a4338d9...@quicinc.com/ > > --- > Xiangxu Yin (14): > dt-bindings: phy: Add QMP USB3+DP PHY for QCS615 > phy: qcom: qmp-usbc: Rename USB-specific ops to prepare for DP support > phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY > phy: qcom: qmp-usbc: Add regulator init_load support > phy: qcom: qmp-usbc: Move reset config into PHY cfg > phy: qcom: qmp-usbc: add DP link and vco_div clocks for DP PHY > phy: qcom: qmp-usbc: Move USB-only init to usb_power_on > phy: qcom: qmp-usbc: Add TCSR parsing and PHY mode setting > phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs > phy: qcom: qmp-usbc: Add USB/DP exclude handling > phy: qcom: qmp: Add DP v2 PHY register definitions > phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support > drm/msm/dp: move link-specific parsing from dp_panel to dp_link > drm/msm/dp: Add support for lane mapping configuration > > .../bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml | 111 ++ > drivers/gpu/drm/msm/dp/dp_ctrl.c | 10 +- > drivers/gpu/drm/msm/dp/dp_link.c | 118 +++ > drivers/gpu/drm/msm/dp/dp_link.h | 5 + > drivers/gpu/drm/msm/dp/dp_panel.c | 78 +- > drivers/gpu/drm/msm/dp/dp_panel.h | 3 - > drivers/phy/qualcomm/phy-qcom-qmp-dp-phy-v2.h | 21 + > drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v2.h | 106 ++ > .../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v2.h | 68 ++ > drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 1072 > ++++++++++++++++++-- > drivers/phy/qualcomm/phy-qcom-qmp.h | 3 + > 11 files changed, 1427 insertions(+), 168 deletions(-) > --- > base-commit: 8e2755d7779a95dd61d8997ebce33ff8b1efd3fb > change-id: 20250919-add-displayport-support-for-qcs615-platform-f885597b3573 > > Best regards,
