Hi,
On Mon, 8 Dec 2025 09:44:23 +0100, Thomas Zimmermann <[email protected]>
wrote:
> >> On the 2400-and-onwards models, ast could set
> >> drm_device.mode_config.quirk_addfb_prefer_host_byte_order. If set, the
> >> format lookup will select a different format on BE machines. [1] For
> >> example requesting XRGB8888 returns BGRX8888 instead. If ast later
> >> sees such a format in the atomic_update code, it could transparently
> >> swap bytes when writing out pixels to the video memory. IIRC this
> >> works transparently to DRM clients and fbcon. I think this would be
> >> the preferred way of fixing the issue.
> > Uff, I get better than nothing ;-)
>
> Well, you can set the quirk in mode config. And then in
> ast_handle_damage(), you'll require a switch for the big-endian
> formats. [1]
>
> ast_handle_damage(...)
> {
> ...
>
> switch (fb->format->format) {
> default:
> drm_fb_memcyp()
> break;
> case DRM_FORMAT_BGRX8888:
> case DRM_FORMAT_RGB565 | DRM_FORMAT_BIG_ENDIAN:
> /* Swap bytes on big-endian formats */
> drm_fb_swab(dst, fb->pitches, src, fb, clip, false,
> fmtcnv_state);
> break;
> }
> }
>
> You can get that final argument fmtcnv_state from the DMR shadow-plane
> state. [2]
>
> [1]
> https://elixir.bootlin.com/linux/v6.18/source/drivers/gpu/drm/ast/ast_mode.c#L549
> [2]
> https://elixir.bootlin.com/linux/v6.18/source/drivers/gpu/drm/ast/ast_mode.c#L558
>
> Does that fix the color corruption?
Following your suggestions conversion does not want to just work:
root@XCODE_SPARC_T4_1:~# dmesg | tail
[ 105.444761] ast 0000:0a:00.0: AST 2200 detected
[ 105.444947] ast 0000:0a:00.0: [drm] dram MCLK=266 Mhz type=2 bus_width=32
[ 105.444963] ast 0000:0a:00.0: [drm] Using analog VGA
[ 105.445470] [drm] Initialized ast 0.1.0 for 0000:0a:00.0 on minor 0
[ 105.673289] ast 0000:0a:00.0: [drm] format BX24 little-endian (0x34325842)
not supported
[ 105.673302] ast 0000:0a:00.0: [drm] No compatible format found
[ 105.673348] ast 0000:0a:00.0: [drm] *ERROR* fbdev: Failed to setup emulation
(ret=-22)
[ 105.901306] ast 0000:0a:00.0: [drm] format BX24 little-endian (0x34325842)
not supported
[ 105.901319] ast 0000:0a:00.0: [drm] No compatible format found
[ 105.901350] ast 0000:0a:00.0: [drm] *ERROR* fbdev: Failed to setup emulation
(ret=-22)
WIP w/ BIG_ENDIAN temp commented out to test the code-path on the
otherwise function big-endian byte-swapping SPARC64 AST:
diff --git a/drivers/gpu/drm/ast/ast_cursor.c b/drivers/gpu/drm/ast/ast_cursor.c
index 2d3ad7610c2e..3f17aa263bdb 100644
--- a/drivers/gpu/drm/ast/ast_cursor.c
+++ b/drivers/gpu/drm/ast/ast_cursor.c
@@ -227,6 +227,12 @@ static void ast_cursor_plane_helper_atomic_update(struct
drm_plane *plane,
}
break;
}
+
+#if 0 //def __BIG_ENDIAN
+ /* Big-endian byte-swapping */
+ ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xa2, 0x3f,
AST_IO_VGACRA2_BE_MODE_16);
+#endif
+
ast_set_cursor_image(ast, argb4444, fb->width, fb->height);
ast_set_cursor_base(ast, dst_off);
}
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index cd08990a10f9..1065f481ec5f 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -526,12 +526,23 @@ static int ast_primary_plane_helper_atomic_check(struct
drm_plane *plane,
static void ast_handle_damage(struct ast_plane *ast_plane, struct iosys_map
*src,
struct drm_framebuffer *fb,
- const struct drm_rect *clip)
+ const struct drm_rect *clip,
+ struct drm_format_conv_state *fmtcnv_state)
{
struct iosys_map dst =
IOSYS_MAP_INIT_VADDR_IOMEM(ast_plane_vaddr(ast_plane));
iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format,
clip));
- drm_fb_memcpy(&dst, fb->pitches, src, fb, clip);
+
+ switch (fb->format->format) {
+ default:
+ drm_fb_memcpy(&dst, fb->pitches, src, fb, clip);
+ break;
+ case DRM_FORMAT_BGRX8888:
+ case DRM_FORMAT_RGB565 | DRM_FORMAT_BIG_ENDIAN:
+ /* Swap bytes on big-endian formats */
+ drm_fb_swab(&dst, fb->pitches, src, fb, clip, false,
fmtcnv_state);
+ break;
+ }
}
static void ast_primary_plane_helper_atomic_update(struct drm_plane *plane,
@@ -557,11 +568,25 @@ static void ast_primary_plane_helper_atomic_update(struct
drm_plane *plane,
ast_set_vbios_color_reg(ast, fb->format, ast_crtc_state->vmode);
}
+
/* if the buffer comes from another device */
if (drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE) == 0) {
+#if 0 // def __BIG_ENDIAN
+ /* Big-endian byte-swapping */
+ switch (fb->format->format) {
+ case DRM_FORMAT_RGB565:
+ ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xa2, 0x3f,
AST_IO_VGACRA2_BE_MODE_16);
+ break;
+ case DRM_FORMAT_XRGB8888:
+ ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xa2, 0x3f,
AST_IO_VGACRA2_BE_MODE);
+ break;
+ }
+#endif
+
drm_atomic_helper_damage_iter_init(&iter, old_plane_state,
plane_state);
drm_atomic_for_each_plane_damage(&iter, &damage) {
- ast_handle_damage(ast_plane, shadow_plane_state->data,
fb, &damage);
+ ast_handle_damage(ast_plane, shadow_plane_state->data,
fb, &damage,
+ &shadow_plane_state->fmtcnv_state);
}
drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
@@ -1020,6 +1045,11 @@ int ast_mode_config_init(struct ast_device *ast)
dev->mode_config.max_height = 1200;
}
+#ifdef __BIG_ENDIAN
+ //if (ast->chip >= AST2400)
+ dev->mode_config.quirk_addfb_prefer_host_byte_order = true;
+#endif
+
dev->mode_config.helper_private = &ast_mode_config_helper_funcs;
ret = ast_primary_plane_init(ast);
diff --git a/drivers/gpu/drm/ast/ast_reg.h b/drivers/gpu/drm/ast/ast_reg.h
index 30578e3b07e4..4e11ece9fce7 100644
--- a/drivers/gpu/drm/ast/ast_reg.h
+++ b/drivers/gpu/drm/ast/ast_reg.h
@@ -34,6 +34,8 @@
#define AST_IO_VGACR99_VGAMEM_RSRV_MASK GENMASK(1, 0)
#define AST_IO_VGACRA1_VGAIO_DISABLED BIT(1)
#define AST_IO_VGACRA1_MMIO_ENABLED BIT(2)
+#define AST_IO_VGACRA2_BE_MODE BIT(7)
+#define AST_IO_VGACRA2_BE_MODE_16 (AST_IO_VGACRA2_BE_MODE | BIT(6))
#define AST_IO_VGACRA3_DVO_ENABLED BIT(7)
#define AST_IO_VGACRAA_VGAMEM_SIZE_MASK GENMASK(1, 0)
#define AST_IO_VGACRB6_HSYNC_OFF BIT(0)
--
2.52.0
> Thanks for sticking with it.
Of course!
René
--
René Rebe, ExactCODE GmbH, Berlin, Germany
https://exactco.de • https://t2linux.com • https://patreon.com/renerebe
