On Wed Dec 17, 2025 at 10:33 AM CET, Damon Ding wrote: > When multiple bridges are present, EDID detection capability > (DRM_BRIDGE_OP_EDID) takes precedence over modes detection > (DRM_BRIDGE_OP_MODES). To ensure the above two capabilities are > determined by the last bridge in the chain, we handle three cases: > > Case 1: The later bridge declares only DRM_BRIDGE_OP_MODES > - If the previous bridge declares DRM_BRIDGE_OP_EDID, set > &drm_bridge_connector.bridge_edid to NULL and set > &drm_bridge_connector.bridge_modes to the later bridge. > - Ensure modes detection capability of the later bridge will not > be ignored. > > Case 2: The later bridge declares only DRM_BRIDGE_OP_EDID > - If the previous bridge declares DRM_BRIDGE_OP_MODES, set > &drm_bridge_connector.bridge_modes to NULL and set > &drm_bridge_connector.bridge_edid to the later bridge. > - Although EDID detection capability has higher priority, this > operation is for balance and makes sense. > > Case 3: the later bridge declares both of them > - Assign later bridge as &drm_bridge_connector.bridge_edid and > and &drm_bridge_connector.bridge_modes to this bridge. > - Just leave transfer of these two capabilities as before. > > Signed-off-by: Damon Ding <[email protected]> > Suggested-by: Dmitry Baryshkov <[email protected]> > Tested-by: Marek Szyprowski <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]> -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
