On SC7280 targets, display modes with a width greater than the
max_mixer_width (2400) are rejected during mode validation when
merge3d is disabled. This limitation exists because, without a
3D merge block, two layer mixers cannot be combined(non-DSC interface),
preventing large layers from being split across mixers. As a result,
higher resolution modes cannot be supported.
Enable merge3d support on SC7280 to allow combining streams from
two layer mixers into a single non-DSC interface. This capability
removes the width restriction and enables buffer sizes beyond the
2400-pixel limit.
Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280
target")
Signed-off-by: Mahadevan P <[email protected]>
---
Changes in v2:
- Updated commit message for clarity (Dmitry).
---
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
index 8f978b9c3452..2f8688224f34 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
@@ -13,6 +13,7 @@ static const struct dpu_caps sc7280_dpu_caps = {
.has_dim_layer = true,
.has_idle_pc = true,
.max_linewidth = 2400,
+ .has_3d_merge = true,
.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
};
@@ -134,17 +135,24 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
.name = "pingpong_2", .id = PINGPONG_2,
.base = 0x6b000, .len = 0,
.sblk = &sc7280_pp_sblk,
- .merge_3d = 0,
+ .merge_3d = MERGE_3D_1,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
}, {
.name = "pingpong_3", .id = PINGPONG_3,
.base = 0x6c000, .len = 0,
.sblk = &sc7280_pp_sblk,
- .merge_3d = 0,
+ .merge_3d = MERGE_3D_1,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
},
};
+static const struct dpu_merge_3d_cfg sc7280_merge_3d[] = {
+ {
+ .name = "merge_3d_1", .id = MERGE_3D_1,
+ .base = 0x4f000, .len = 0x8,
+ },
+};
+
/* NOTE: sc7280 only has one DSC hard slice encoder */
static const struct dpu_dsc_cfg sc7280_dsc[] = {
{
@@ -247,6 +255,8 @@ const struct dpu_mdss_cfg dpu_sc7280_cfg = {
.mixer = sc7280_lm,
.pingpong_count = ARRAY_SIZE(sc7280_pp),
.pingpong = sc7280_pp,
+ .merge_3d_count = ARRAY_SIZE(sc7280_merge_3d),
+ .merge_3d = sc7280_merge_3d,
.dsc_count = ARRAY_SIZE(sc7280_dsc),
.dsc = sc7280_dsc,
.wb_count = ARRAY_SIZE(sc7280_wb),
---
base-commit: efb26a23ed5f5dc3554886ab398f559dcb1de96b
change-id: 20251231-4k-969b53d2ea4c
Best regards,
--
Mahadevan P <[email protected]>
