[PATCH v2 3/3] arm64: dts: qcom: qcs6490-rubikpi3: Use lt9611 DSI Port B

[Hongyang Zhao]

The LT9611 HDMI bridge on RubikPi3 has DSI physically connected to
Port B. Update the devicetree to use port@1 which corresponds to
Port B input on the LT9611.

Signed-off-by: Hongyang Zhao <hongyang.z...@thundersoft.com>
Reviewed-by: Roger Shimizu <r...@debian.org>
---
 arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts 
b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts
index 0b64a0b91202..f47efca42d48 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts
@@ -755,10 +755,10 @@ ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       port@0 {
-                               reg = <0>;
+                       port@1 {
+                               reg = <1>;
 
-                               lt9611_a: endpoint {
+                               lt9611_b: endpoint {
                                        remote-endpoint = <&mdss_dsi0_out>;
                                };
                        };
@@ -801,7 +801,7 @@ &mdss_dsi {
 };
 
 &mdss_dsi0_out {
-       remote-endpoint = <&lt9611_a>;
+       remote-endpoint = <&lt9611_b>;
        data-lanes = <0 1 2 3>;
 };
 

-- 
2.43.0