Hi Luca,
On 2/3/2026 7:11 PM, Luca Ceresoli wrote:
Hello Heiko, Damon,
On Mon Jan 19, 2026 at 5:06 PM CET, Heiko Stübner wrote:
Hi Damon,
Am Mittwoch, 17. Dezember 2025, 10:33:03 Mitteleuropäische Normalzeit schrieb
Damon Ding:
PATCH 1 is to ensure the last bridge declares OP_EDID or OP_MODES or both.
PATCH 2 is a small format optimization for struct analogid_dp_device.
PATCH 3 is to perform mode setting in &drm_bridge_funcs.atomic_enable.
PATCH 4 is to add a new parameter to store the point of next bridge.
PATCH 5 is to make legacy bridge driver more universal.
PATCH 6-11 are preparations for apply drm_bridge_connector helper.
PATCH 12 is to apply the drm_bridge_connector helper.
PATCH 13-15 are to move the panel/bridge parsing to the Analogix side.
PATCH 16 is to attach the next bridge on Analogix side uniformly.
PATCH 17-18 are to apply the panel_bridge helper.
On top of all the recent bridge-related commits, this series still works
on my rk3588-eDP board - when the display is plugged in on boot.
As that is the current state we also had before, this series:
Tested-by: Heiko Stuebner <[email protected]> on rk3588
I'm appplying patches 1-3 and got a checkpatch warning for each patch:
WARNING: Unexpected content after email: 'Heiko Stuebner <[email protected]> on
rk3588', should be: 'Heiko Stuebner <[email protected]> (on rk3588)'
I'm fixing it while applying those 3 patches.
Damon, can you fix that for the remaining patches before sending a new
iteration?
Yes, will fix in v9.
Best regards,
Damon
