On Mon, Feb 23, 2026 at 05:20:44PM +0800, Hermes Wu via B4 Relay wrote: > This patch series adds support for the ITE IT6162 MIPI DSI to HDMI > bridge chip. The IT6162 is an I2C-controlled bridge that receives MIPI > DSI input and outputs HDMI signals. > > The device supports the following configurations: > - Single MIPI DSI input: up to 4K @ 30Hz > - Dual MIPI DSI input (combined): up to 4K @ 60Hz > > This series introduces: > - dt-bindings: Add YAML binding document for ITE IT6162 > - drm/bridge: Add ITE IT6162 MIPI DSI to HDMI bridge driver > - MAINTAINERS: Add entry for ITE IT6162 bridge driver > > Signed-off-by: Hermes Wu <[email protected]> > --- > Hermes Wu (3): > drm/bridge: Add ITE IT6162 MIPI DSI to HDMI bridge driver > dt-bindings: display: bridge: Add ITE IT6162 MIPI DSI to HDMI bridge > MAINTAINERS: Add entry for ITE IT6162 MIPI DSI to HDMI bridge driver
Please change the order: the bindings should come as a first patch. Also please squash MAINTAINERS entry into the driver patch. > > .../bindings/display/bridge/ite,it6162.yaml | 156 ++ > MAINTAINERS | 8 + > drivers/gpu/drm/bridge/Kconfig | 17 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/ite-it6162.c | 1876 > ++++++++++++++++++++ > 5 files changed, 2058 insertions(+) > --- > base-commit: 38feb171b3f92d77e8061fafb5ddfffc2c13b672 > change-id: 20260223-upstream-6162-3751e78dfcad > > Best regards, > -- > Hermes Wu <[email protected]> > > -- With best wishes Dmitry
