Add a new optional device tree property `ti,dual-link-video-mode` to indicate that the bridge should configure the device for dual-link LVDS video mode.
In dual-link configurations, some panels require the horizontal timing parameters to be adjusted before programming them into the device. In such cases, the horizontal timing values must be divided by two when operating in dual-link mode. Signed-off-by: Sudarshan Shetty <[email protected]> --- .../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml index e69b6343a8eb..b610739555a4 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -38,6 +38,15 @@ properties: interrupts: maxItems: 1 + ti,dual-link-video-mode: + type: boolean + description: | + Enables configuration settings required for correct dual-link + LVDS operation. Some panels require the horizontal timing + parameters to be adjusted before being programmed into the + device. The horizontal timing values must be divided by + two when operating in dual-link mode. + ports: $ref: /schemas/graph.yaml#/properties/ports -- 2.34.1
