Hi Biju, On Tue, 17 Mar 2026 15:13:07 +0000 Biju Das <[email protected]> wrote:
> Hi Hugo, > > Thanks for the feedback. > > > -----Original Message----- > > From: dri-devel <[email protected]> On Behalf Of Hugo > > Villeneuve > > Sent: 17 March 2026 15:01 > > Subject: Re: [PATCH 2/2] drm: renesas: rzg2l_mipi_dsi: Fix the power-on > > sequence > > > > Hi Biju, > > > > On Tue, 17 Mar 2026 12:36:01 +0000 > > Biju <[email protected]> wrote: > > > > > From: Biju Das <[email protected]> > > > > > > Move reset_control_deassert() and reset_control_assert() from > > > rzg2l_mipi_dsi_dphy_init()/rzg2l_mipi_dsi_dphy_exit() to > > > atomic_pre_enable() and atomic_post_disable() respectively, and move > > > rzg2l_mipi_dsi_set_display_timing() from atomic_pre_enable() to > > > atomic_enable(), to align with the power-on sequence described in > > > Figure 34.5 of section "34.4.2.1 Reset" of the RZ/G2L hardware manual > > > Rev.1.50 May 2025. > > > > > > According to the hardware manual, LINK registers must be written > > > before deasserting CMN_RSTB, and the 1ms delay is retained in > > > atomic_pre_enable() after the deassert. > > > > > > Signed-off-by: Biju Das <[email protected]> > > > > Seems to me like this should be backported to stable branches (missing > > Fixes / Cc: stable tags)? > > OK, will add fixes/stable tags. > > > > > > > > --- > > > .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 27 +++++++++++-------- > > > 1 file changed, 16 insertions(+), 11 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c > > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c > > > index e53b48e4de56..9053ce037b75 100644 > > > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c > > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c > > > @@ -484,7 +484,6 @@ static int rzg2l_mipi_dsi_dphy_init(struct > > > rzg2l_mipi_dsi *dsi, > > > u32 dphytim1; > > > u32 dphytim2; > > > u32 dphytim3; > > > - int ret; > > > > > > /* All DSI global operation timings are set with recommended setting */ > > > for (i = 0; i < ARRAY_SIZE(rzg2l_mipi_dsi_global_timings); ++i) { @@ > > > -524,12 +523,6 @@ static int rzg2l_mipi_dsi_dphy_init(struct > > > rzg2l_mipi_dsi *dsi, > > > rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM2, dphytim2); > > > rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM3, dphytim3); > > > > > > - ret = reset_control_deassert(dsi->rstc); > > > - if (ret < 0) > > > - return ret; > > > - > > > - fsleep(1000); > > > - > > > return 0; > > > } > > > > > > @@ -541,8 +534,6 @@ static void rzg2l_mipi_dsi_dphy_exit(struct > > > rzg2l_mipi_dsi *dsi) > > > > > > dphyctrl0 &= ~(DSIDPHYCTRL0_EN_LDO1200 | DSIDPHYCTRL0_EN_BGR); > > > rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYCTRL0, dphyctrl0); > > > - > > > - reset_control_assert(dsi->rstc); > > > } > > > > > > static int rzg2l_dphy_conf_clks(struct rzg2l_mipi_dsi *dsi, unsigned > > > long mode_freq, @@ -1030,24 +1021,37 @@ static void > > > rzg2l_mipi_dsi_atomic_pre_enable(struct > > drm_bridge *bridge, > > > connector = drm_atomic_get_new_connector_for_encoder(state, > > > bridge->encoder); > > > crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > > > mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode; > > > - > > > > This is not related to your commit message (coding style change). > > Ack. Will restore it. > > > > > > > > ret = rzg2l_mipi_dsi_startup(dsi, mode); > > > if (ret < 0) > > > return; > > > > > > - rzg2l_mipi_dsi_set_display_timing(dsi, mode); > > > + ret = reset_control_deassert(dsi->rstc); > > > + if (ret < 0) > > > + return; > > > + > > > + if (dsi->rstc) > > > > This seems new and not documented in the commit message? Is this a fix? > > RZ/V2H does not need this as it uses different IP. Previously fsleep() is in > RZ/G2L specific function. I will update commit description for this change. Suggestion: maybe move this to a separate patch, to facilitate review/understanding... > Cheers, > Biju > > > > > > > > + fsleep(1000); > > > } > > > > > > static void rzg2l_mipi_dsi_atomic_enable(struct drm_bridge *bridge, > > > struct drm_atomic_state *state) { > > > struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge); > > > + const struct drm_display_mode *mode; > > > + struct drm_connector *connector; > > > + struct drm_crtc *crtc; > > > int ret; > > > > > > ret = rzg2l_mipi_dsi_start_hs_clock(dsi); > > > if (ret < 0) > > > goto err_stop; > > > > > > + connector = drm_atomic_get_new_connector_for_encoder(state, > > > bridge->encoder); > > > + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > > > + mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode; > > > + > > > + rzg2l_mipi_dsi_set_display_timing(dsi, mode); > > > + > > > ret = rzg2l_mipi_dsi_start_video(dsi); > > > if (ret < 0) > > > goto err_stop_clock; > > > @@ -1074,6 +1078,7 @@ static void > > > rzg2l_mipi_dsi_atomic_post_disable(struct drm_bridge *bridge, { > > > struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge); > > > > > > + reset_control_assert(dsi->rstc); > > > rzg2l_mipi_dsi_stop(dsi); > > > } > > > > > > -- > > > 2.43.0 > > > > > > > > > > > > -- > > Hugo Villeneuve <[email protected]> > -- Hugo Villeneuve <[email protected]>
