From: Sunyun Yang <[email protected]> The LT7911EXC is an I2C-controlled bridge that Receiver eDP1.4 and output signal/dual port mipi dsi.
Signed-off-by: Sunyun Yang <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> --- .../display/bridge/lontium,lt7911exc.yaml | 89 +++++++++++++++++++ 1 file changed, 89 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt7911exc.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt7911exc.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt7911exc.yaml new file mode 100644 index 000000000000..3290b10ce883 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt7911exc.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt7911exc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT7911EXC eDP to MIPI DSI Bridge + +maintainers: + - Sunyun Yang <[email protected]> + +properties: + compatible: + enum: + - lontium,lt7911exc + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to RST_ pin. + + vdd-supply: + description: Regulator for 1.2V MIPI phy power. + + vcc-supply: + description: Regulator for 3.3V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for eDP input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for MIPI DSI output. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - vdd-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + mipi-bridge@41 { + compatible = "lontium,lt7911exc"; + reg = <0x41>; + reset-gpios = <&gpy8 8 GPIO_ACTIVE_LOW>; + vdd-supply = <<7911exc_1v2>; + vcc-supply = <<7911exc_3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&edp_out>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; -- 2.34.1
