On Fri, May 08, 2026 at 11:00:15AM +0100, Lad, Prabhakar wrote:
> On Wed, May 6, 2026 at 9:14 PM Laurent Pinchart wrote:
> > On Wed, Apr 29, 2026 at 06:00:11PM +0100, Prabhakar wrote:
> > > From: Lad Prabhakar <[email protected]>
> > >
> > > Move pixel clock validation from a fixed encoder check to per SoC
> > > constraints stored in rzg2l_du_device_info.
> > >
> > > Pixel clock limits differ across SoCs in the RZ DU family and cannot be
> > > expressed by a single shared rule. For example, RZ/G2UL (R9A07G043U)
> > > limits the DPAD0 pixel clock to 83.5 MHz, while other SoCs such as
> > > RZ/T2H require a wider operating range.
> > >
> > > Add mode_clock_min and mode_clock_max fields to rzg2l_du_device_info to
> > > describe the supported pixel clock range for each SoC. Update
> > > rzg2l_du_encoder_mode_valid() to return MODE_CLOCK_LOW when the pixel
> > > clock falls below mode_clock_min and MODE_CLOCK_HIGH when it exceeds
> > > mode_clock_max.
> > >
> > > Set the pixel clock limits for RZ/G2UL(R9A07G043U) to 20.875MHz minimum
> > > and 83.5MHz maximum.
> > >
> > > Signed-off-by: Lad Prabhakar <[email protected]>
> > > ---
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 2 ++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 4 ++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 6 +++++-
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 2 ++
> > > 4 files changed, 13 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > index 0fef33a5a089..3b7162c6e1f4 100644
> > > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > @@ -35,6 +35,8 @@ static const struct rzg2l_du_device_info
> > > rzg2l_du_r9a07g043u_info = {
> > > .port = 0,
> > > },
> > > },
> > > + .mode_clock_min = 20875,
> > > + .mode_clock_max = 83500,
> > > };
> > >
> > > static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
> > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > index 58806c2a8f2b..885558eb9547 100644
> > > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > @@ -44,10 +44,14 @@ struct rzg2l_du_output_routing {
> > > * struct rzg2l_du_device_info - DU model-specific information
> > > * @channels_mask: bit mask of available DU channels
> > > * @routes: array of CRTC to output routes, indexed by output
> > > (RZG2L_DU_OUTPUT_*)
> > > + * @mode_clock_min: minimum pixel clock in kHz
> > > + * @mode_clock_max: maximum pixel clock in kHz
> > > */
> > > struct rzg2l_du_device_info {
> > > unsigned int channels_mask;
> > > struct rzg2l_du_output_routing routes[RZG2L_DU_OUTPUT_MAX];
> > > + u32 mode_clock_min;
> > > + u32 mode_clock_max;
> > > };
> > >
> > > #define RZG2L_DU_MAX_CRTCS 1
> > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > index d53068733c66..ad02efec1c23 100644
> > > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > @@ -50,8 +50,11 @@ rzg2l_du_encoder_mode_valid(struct drm_encoder
> > > *encoder,
> > > const struct drm_display_mode *mode)
> > > {
> > > struct rzg2l_du_encoder *renc = to_rzg2l_encoder(encoder);
> > > + const struct rzg2l_du_device_info *info = renc->info;
> >
> > You could use
> >
> > struct rzg2l_du_device *rcdu = to_rzg2l_du_device(renc->base.dev);
> > const struct rzg2l_du_device_info *info = rcdu->info;
> >
> > and avoid the info pointer in struct rzg2l_du_encoder. Up to you.
>
> Agreed, I will drop the info pointer for now.
>
> > >
> > > - if (renc->output == RZG2L_DU_OUTPUT_DPAD0 && mode->clock > 83500)
> > > + if (info->mode_clock_min && mode->clock < info->mode_clock_min)
> > > + return MODE_CLOCK_LOW;
> > > + if (info->mode_clock_max && mode->clock > info->mode_clock_max)
> > > return MODE_CLOCK_HIGH;
> >
> > The new check now applies to all outputs, not just the DPAD0 output. Is
> > that intentional ?
>
> The RZ/G2UL SoC only supports DPAD0 so the check is redundant.
Ah right. Please mention that in the commit message.
> > >
> > > return MODE_OK;
> > > @@ -107,6 +110,7 @@ int rzg2l_du_encoder_init(struct rzg2l_du_device
> > > *rcdu,
> > > if (IS_ERR(renc))
> > > return PTR_ERR(renc);
> > >
> > > + renc->info = rcdu->info;
> > > renc->output = output;
> > > drm_encoder_helper_add(&renc->base, &rzg2l_du_encoder_helper_funcs);
> > >
> > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > index 3e430c1f6132..39a1d178b856 100644
> > > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > @@ -14,10 +14,12 @@
> > > #include <linux/container_of.h>
> > >
> > > struct rzg2l_du_device;
> > > +struct rzg2l_du_device_info;
> > >
> > > struct rzg2l_du_encoder {
> > > struct drm_encoder base;
> > > enum rzg2l_du_output output;
> > > + const struct rzg2l_du_device_info *info;
> >
> > If you want to keep a pointer here to avoid going through
> > to_rzg2l_du_device(), I would store a backpointer to rzg2l_du_device
> > instead of just an info pointer, it could come handy in other places.
>
> As agreed above I will drop this pointer for now.
--
Regards,
Laurent Pinchart
