From: Marek Vasut <[email protected]> DisplayPort on the Sparrow Hawk board uses sn65dsi86 bridge, which in turn gets the video stream from the SoC's DSI1 port. DSI1 pipeline has a DSC block in between the DU and the DSI1. However, there was no DSC driver in Linux and also the DSC was not defined in the dts files, and thus the DisplayPort output did not work.
Now that we have DSC defined in the SoC dts file (r8a779g0.dtsi), we can enable DSC for sparrowhawk. Signed-off-by: Marek Vasut <[email protected]> [tomi.valkeinen: separated the sparrow hawk changes from the soc changes] Signed-off-by: Tomi Valkeinen <[email protected]> --- arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts index 812b133cf29e..f418998c6b05 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts @@ -288,6 +288,11 @@ channel4 { }; }; +/* Page 27 / DSI to Display */ +&dsc { + status = "okay"; +}; + /* Page 27 / DSI to Display */ &dsi1 { status = "okay"; -- 2.43.0
