On Thu, 21 May 2026 22:46:06 +0800, Jun Nie wrote: > Add support for the dual-panel system found in the virtual reality device. > This system consists of two physical 2160x2160 panels, each connected via > a MIPI DSI interface. The backlight is managed through DSI link. > > Signed-off-by: Jun Nie <[email protected]> > --- > .../bindings/display/panel/synaptics,r63455.yaml | 125 > +++++++++++++++++++++ > 1 file changed, 125 insertions(+) >
My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/display/panel/synaptics,r63455.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation) ./Documentation/devicetree/bindings/display/panel/synaptics,r63455.yaml:55:14: [error] syntax error: mapping values are not allowed here (syntax) dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/synaptics,r63455.yaml: ignoring, error parsing file ./Documentation/devicetree/bindings/display/panel/synaptics,r63455.yaml:55:14: mapping values are not allowed here make[2]: *** Deleting file 'Documentation/devicetree/bindings/display/panel/synaptics,r63455.example.dts' Documentation/devicetree/bindings/display/panel/synaptics,r63455.yaml:55:14: mapping values are not allowed here make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/display/panel/synaptics,r63455.example.dts] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1659: dt_binding_check] Error 2 make: *** [Makefile:248: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.kernel.org/project/devicetree/patch/[email protected] The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
