From: Vitor Soares <[email protected]> This series adds device tree overlays, expanding the hardware support for the Toradex Verdin AM62 SoM. The overlays target displays, cameras, audio, and peripherals available through Toradex carrier boards and the accessory ecosystem.
Display additions cover three interface types: - native OLDI (LVDS) with Toradex Capacitive Touch Display 10.1" LVDS - DSI-to-LVDS adapter based on the SN65DSI84 with Toradex Capacitive Touch Display 10.1" LVDS - DSI driving Toradex Capacitive Touch Display 7" and 10.1" DSI. The Riverdi vendor prefix and panel bindings required by the DSI overlay patches are also added. Non-display additions include OV5640 CSI camera support in 24 MHz and 27 MHz oscillator variants, NAU8822 Bridge Tied Load mode on the Development Board, MCU_MCAN1 on the Verdin AM62 Mezzanine board, and MCU_UART0 reservation for the Cortex-M4F debug UART. TI maintainers: patches adding the Riverdi vendor prefix and panel-lvds bindings are required by the DTS patches. Are you fine picking up the full series once those patches are acked by the DT/display maintainers? Thanks, Vitor Soares --- Changes in v2: - Add Acked-by tags - Drop introduction of the LG LP156WF1 15.6" FHD dual-channel LVDS panel - Drop migration of "logictechno,lt170410-2whc" to panel-lvds.yaml - Link v1: https://lore.kernel.org/all/[email protected]/ --- Vitor Soares (11): arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with 10.1" display arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS dt-bindings: vendor-prefixes: Add Riverdi dt-bindings: display: panel-lvds: Add Riverdi RVT70HSLNWCA0 and RVT101HVLNWC00 arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" DSI arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 7" DSI arm64: dts: ti: k3-am62-verdin: Add NAU8822 Bridge Tied Load arm64: dts: ti: k3-am62-verdin: Reserve UART_4 for Cortex-M4F arm64: dts: ti: k3-am62-verdin: Add Toradex OV5640 CSI Cameras arm64: dts: ti: k3-am62-verdin: Add Toradex Verdin Mezzanine CAN arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS .../bindings/display/panel/panel-lvds.yaml | 4 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/ti/Makefile | 49 +++++++ .../ti/k3-am625-verdin-dev-mezzanine-can.dtso | 28 ++++ ...mezzanine-panel-cap-touch-10inch-lvds.dtso | 97 +++++++++++++ .../ti/k3-am625-verdin-dev-nau8822-btl.dtso | 14 ++ ...in-dsi-to-lvds-panel-cap-touch-10inch.dtso | 123 ++++++++++++++++ .../dts/ti/k3-am625-verdin-ov5640-24mhz.dtso | 17 +++ .../boot/dts/ti/k3-am625-verdin-ov5640.dtsi | 71 ++++++++++ .../boot/dts/ti/k3-am625-verdin-ov5640.dtso | 18 +++ ...625-verdin-panel-cap-touch-10inch-dsi.dtso | 132 ++++++++++++++++++ ...25-verdin-panel-cap-touch-10inch-lvds.dtso | 119 ++++++++++++++++ ...m625-verdin-panel-cap-touch-7inch-dsi.dtso | 132 ++++++++++++++++++ .../dts/ti/k3-am625-verdin-uart4-mcu.dtso | 13 ++ 14 files changed, 819 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-can.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dev-nau8822-btl.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640-24mhz.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-ov5640.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-dsi.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-lvds.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-7inch-dsi.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-uart4-mcu.dtso -- 2.54.0
