Hi Dmitry,
On 6/27/2026 2:11 AM, Dmitry Baryshkov wrote:
On Wed, Jun 24, 2026 at 02:23:52PM +0530, Arpit Saini wrote:
Add a DRM panel driver for the DLC DLC0697 1080x1920@60Hz MIPI DSI
panel based on the Ilitek ILI7807S display controller.
The panel operates in video burst mode with four data lanes using
RGB888 pixel format.
Signed-off-by: Arpit Saini <[email protected]>
---
drivers/gpu/drm/panel/Kconfig | 12 ++
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili7807s.c | 293 ++++++++++++++++++++++++++
3 files changed, 306 insertions(+)
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 7450b27622a2..1cbaac1bf545 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -264,6 +264,18 @@ config DRM_PANEL_HYDIS_HV101HD1
If M is selected the module will be called panel-hydis-hv101hd1
+config DRM_PANEL_ILITEK_ILI7807S
+ tristate "Ilitek ILI7807S-based panels"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y if you want to enable support for panels based on the
+ Ilitek ILI7807S display controller, such as the DLC DLC0697
+ 1080x1920 MIPI DSI panel.
+
+ If M is selected the module will be called panel-ilitek-ili7807s.
+
config DRM_PANEL_ILITEK_IL9322
tristate "Ilitek ILI9322 320x240 QVGA panels"
depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index c2c5cf817116..c3002b351cb8 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_DRM_PANEL_HIMAX_HX83112B) +=
panel-himax-hx83112b.o
obj-$(CONFIG_DRM_PANEL_HIMAX_HX83121A) += panel-himax-hx83121a.o
obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o
obj-$(CONFIG_DRM_PANEL_HYDIS_HV101HD1) += panel-hydis-hv101hd1.o
+obj-$(CONFIG_DRM_PANEL_ILITEK_ILI7807S) += panel-ilitek-ili7807s.o
obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9805) += panel-ilitek-ili9805.o
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili7807s.c
b/drivers/gpu/drm/panel/panel-ilitek-ili7807s.c
new file mode 100644
index 000000000000..8ddfab2693ec
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili7807s.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+
+struct panel_desc {
+ const struct drm_display_mode *mode;
+ unsigned int lanes;
+ enum mipi_dsi_pixel_format format;
+ unsigned long mode_flags;
+ void (*init)(struct mipi_dsi_multi_context *dsi_ctx);
+};
+
+struct ili7807s {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+ const struct panel_desc *desc;
+
+ struct regulator_bulk_data *supplies;
+ struct gpio_desc *reset_gpio;
+};
+
+static const struct regulator_bulk_data ili7807s_supplies[] = {
+ { .supply = "vddi" },
+ { .supply = "avdd" },
+ { .supply = "avee" },
+};
+
+static inline struct ili7807s *to_ili7807s(struct drm_panel *panel)
+{
+ return container_of(panel, struct ili7807s, panel);
+}
+
+static void ili7807s_reset(struct ili7807s *ctx)
+{
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
This looks like the reset being active-low. Please define it as is in
the DT and use normal (hold = 1, drop = 0) semantics in the driver.\
Ack.
+}
+
+static void dlc0697_init_sequence(struct mipi_dsi_multi_context *dsi_ctx)
+{
+ mipi_dsi_dcs_soft_reset_multi(dsi_ctx);
+ mipi_dsi_msleep(dsi_ctx, 120);
+
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0x78, 0x07, 0x00);
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x35, 0x00);
mipi_dsi_dcs_set_tear_on_multi()
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x5e, 0x09, 0x99);
MIPI_DCS_SET_CABC_MIN_BRIGHTNESS
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x53, 0x24);
MIPI_DCS_WRITE_CONTROL_DISPLAY
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x55, 0x01);
MIPI_DCS_WRITE_POWER_SAVE
Ack.
+ mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x51, 0x3f, 0xff);
mipi_dsi_dcs_set_display_brightness_large_multi(). Also please use
0x1fff instead of the full brightness.
+
+ mipi_dsi_dcs_exit_sleep_mode_multi(dsi_ctx);
+ mipi_dsi_msleep(dsi_ctx, 120);
+
+ mipi_dsi_dcs_set_display_on_multi(dsi_ctx);
+ mipi_dsi_msleep(dsi_ctx, 20);
+}
+
+static int ili7807s_on(struct ili7807s *ctx)
+{
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+ ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
Drop, set it in probe()
Ack.
+
+ ctx->desc->init(&dsi_ctx);
+
+ ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
Drop
+
+ return dsi_ctx.accum_err;
+}
+
+static int ili7807s_off(struct ili7807s *ctx)
+{
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+ ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
Drop
+
+ mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+ mipi_dsi_msleep(&dsi_ctx, 20);
+
+ mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+ mipi_dsi_msleep(&dsi_ctx, 120);
+
+ ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
Drop
+
+ return dsi_ctx.accum_err;
+}
+
+static int ili7807s_prepare(struct drm_panel *panel)
+{
+ struct ili7807s *ctx = to_ili7807s(panel);
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ili7807s_supplies),
ctx->supplies);
+ if (ret < 0) {
+ dev_err(ctx->panel.dev, "failed to enable regulators: %d\n",
ret);
+ return ret;
+ }
+
+ msleep(20);
+
+ ili7807s_reset(ctx);
+
+ ret = ili7807s_on(ctx);
+ if (ret < 0) {
+ dev_err(ctx->panel.dev, "failed to initialise panel: %d\n",
ret);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+ regulator_bulk_disable(ARRAY_SIZE(ili7807s_supplies), ctx->supplies);
+ return ret;
+}
+
+static int ili7807s_unprepare(struct drm_panel *panel)
+{
+ struct ili7807s *ctx = to_ili7807s(panel);
+ int ret;
+
+ ret = ili7807s_off(ctx);
+ if (ret < 0)
+ dev_err(ctx->panel.dev, "failed to disable panel: %d\n", ret);
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+ regulator_bulk_disable(ARRAY_SIZE(ili7807s_supplies), ctx->supplies);
+
+ return 0;
+}
+
+static int ili7807s_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct ili7807s *ctx = to_ili7807s(panel);
+
+ return drm_connector_helper_get_modes_fixed(connector, ctx->desc->mode);
+}
+
+static const struct drm_panel_funcs ili7807s_panel_funcs = {
+ .prepare = ili7807s_prepare,
+ .unprepare = ili7807s_unprepare,
+ .get_modes = ili7807s_get_modes,
+};
+
+static int ili7807s_bl_update_status(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ u16 brightness = backlight_get_brightness(bl);
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ return ret;
+}
+
+static const struct backlight_ops ili7807s_bl_ops = {
+ .update_status = ili7807s_bl_update_status,
+};
+
+static struct backlight_device *ili7807s_create_backlight(struct
mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ const struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ .brightness = 0x3fff,
+ .max_brightness = 0x3fff,
+ };
+
+ return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+ &ili7807s_bl_ops, &props);
+}
+
+static const struct drm_display_mode dlc0697_mode = {
+ .clock = 131911,
= (1080 + 18 + 2 + 16) * (1920 + 26 + 4 + 20) * 60 / 1000
Ack.
+
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 18,
+ .hsync_end = 1080 + 18 + 2,
+ .htotal = 1080 + 18 + 2 + 16,
+
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 26,
+ .vsync_end = 1920 + 26 + 4,
+ .vtotal = 1920 + 26 + 4 + 20,
+
+ .width_mm = 0,
+ .height_mm = 0,
Do you really don't know the dimensions of the panel you are
contributing?
Ack, will update in v4.
Thanks
Arpit
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
