From: Abhinav Kumar <[email protected]>

If the DP controller is capable of supporting multiple streams
then initialize the DP sink in MST mode by programming the DP_MSTM_CTRL
DPCD register to enable MST mode.

Signed-off-by: Abhinav Kumar <[email protected]>
Signed-off-by: Yongxing Mou <[email protected]>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 48 +++++++++++++++++++++++++++++++------
 1 file changed, 41 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c 
b/drivers/gpu/drm/msm/dp/dp_display.c
index 5786e598a406..c3be656f10ee 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -14,6 +14,7 @@
 #include <linux/string_choices.h>
 #include <drm/display/drm_dp_aux_bus.h>
 #include <drm/display/drm_hdmi_audio_helper.h>
+#include <drm/display/drm_dp_mst_helper.h>
 #include <drm/drm_edid.h>
 
 #include "msm_drv.h"
@@ -270,6 +271,31 @@ static int msm_dp_display_lttpr_init(struct 
msm_dp_display_private *dp, u8 *dpcd
        return lttpr_count;
 }
 
+static void msm_dp_display_mst_init(struct msm_dp_display_private *dp)
+{
+       u8 old_mstm_ctrl;
+       struct msm_dp *msm_dp = &dp->msm_dp_display;
+       int ret;
+
+       /* clear sink MST state */
+       drm_dp_dpcd_read_byte(dp->aux, DP_MSTM_CTRL, &old_mstm_ctrl);
+
+       ret = drm_dp_dpcd_write_byte(dp->aux, DP_MSTM_CTRL, 0);
+       if (ret < 0) {
+               DRM_ERROR("failed to clear DP_MSTM_CTRL, ret=%d\n", ret);
+               return;
+       }
+
+       ret = drm_dp_dpcd_write_byte(dp->aux, DP_MSTM_CTRL,
+                                    DP_MST_EN | DP_UP_REQ_EN | 
DP_UPSTREAM_IS_SRC);
+       if (ret < 0) {
+               DRM_ERROR("sink MST enablement failed\n");
+               return;
+       }
+
+       msm_dp->mst_active = true;
+}
+
 static int msm_dp_display_process_hpd_high(struct msm_dp_display_private *dp)
 {
        struct drm_connector *connector = dp->msm_dp_display.connector;
@@ -288,14 +314,19 @@ static int msm_dp_display_process_hpd_high(struct 
msm_dp_display_private *dp)
        if (rc)
                goto end;
 
-       drm_edid = drm_edid_read_ddc(connector, &dp->aux->ddc);
-       drm_edid_connector_update(connector, drm_edid);
+       if (!(dp->max_stream > 1) || !drm_dp_read_mst_cap(dp->aux, 
dp->panel->dpcd)) {
+               drm_edid = drm_edid_read_ddc(connector, &dp->aux->ddc);
+               drm_edid_connector_update(connector, drm_edid);
 
-       if (!drm_edid) {
-               DRM_ERROR("panel edid read failed\n");
-               /* check edid read fail is due to unplug */
-               if (!msm_dp_aux_is_link_connected(dp->aux))
-                       return -ETIMEDOUT;
+               if (!drm_edid) {
+                       DRM_ERROR("panel edid read failed\n");
+                       /* check edid read fail is due to unplug */
+                       if (!msm_dp_aux_is_link_connected(dp->aux))
+                               return -ETIMEDOUT;
+               }
+
+               if (rc)
+                       goto end;
        }
 
        msm_dp_link_process_request(dp->link);
@@ -317,6 +348,9 @@ static int msm_dp_display_process_hpd_high(struct 
msm_dp_display_private *dp)
         */
        msm_dp_link_psm_config(dp->link, &dp->panel->link_info, false);
 
+       if (dp->max_stream > 1 && drm_dp_read_mst_cap(dp->aux, dp->panel->dpcd))
+               msm_dp_display_mst_init(dp);
+
        msm_dp_link_reset_phy_params_vx_px(dp->link);
 
 end:

-- 
2.43.0

Reply via email to