On Wed, Jun 17, 2026 at 11:00:25AM +0300, Svyatoslav Ryhel wrote:
> Since there are no users of this driver via platform data, remove the
> platform data support and switch to using Device Tree bindings.
>
> Signed-off-by: Svyatoslav Ryhel <[email protected]>
> Reviewed-by: Daniel Thompson (RISCstar) <[email protected]> #for backlight
> ---
> drivers/iio/light/lm3533-als.c | 67 +++++---
> drivers/leds/leds-lm3533.c | 50 ++++--
> drivers/mfd/lm3533-core.c | 236 ++++++++++++----------------
> drivers/mfd/lm3533-ctrlbank.c | 5 -
> drivers/video/backlight/lm3533_bl.c | 55 +++++--
> include/linux/mfd/lm3533.h | 52 +-----
> 6 files changed, 220 insertions(+), 245 deletions(-)
> static int lm3533_als_probe(struct platform_device *pdev)
> {
> - const struct lm3533_als_platform_data *pdata;
> struct lm3533 *lm3533;
> struct lm3533_als *als;
> struct iio_dev *indio_dev;
> @@ -803,12 +817,6 @@ static int lm3533_als_probe(struct platform_device *pdev)
> if (!lm3533)
> return -EINVAL;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*als));
> if (!indio_dev)
> return -ENOMEM;
> @@ -817,25 +825,27 @@ static int lm3533_als_probe(struct platform_device
> *pdev)
> indio_dev->channels = lm3533_als_channels;
> indio_dev->num_channels = ARRAY_SIZE(lm3533_als_channels);
> indio_dev->name = dev_name(&pdev->dev);
> - iio_device_set_parent(indio_dev, pdev->dev.parent);
Why are you reparenting the iio device here?
That's an ABI break.
> +static const struct of_device_id lm3533_als_match_table[] = {
> + { .compatible = "ti,lm3533-als" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_als_match_table);
> +
> static struct platform_driver lm3533_als_driver = {
> .driver = {
> .name = "lm3533-als",
> + .of_match_table = lm3533_als_match_table,
> },
> .probe = lm3533_als_probe,
> .remove = lm3533_als_remove,
You should also remove the platform module alias below.
> diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
> index 0cb0585eb960..ed810c23f30f 100644
> --- a/drivers/leds/leds-lm3533.c
> +++ b/drivers/leds/leds-lm3533.c
> @@ -10,8 +10,10 @@
> #include <linux/module.h>
> #include <linux/leds.h>
> #include <linux/mfd/core.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/mutex.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/regmap.h>
> #include <linux/slab.h>
>
> @@ -50,6 +52,9 @@ struct lm3533_led {
> struct mutex mutex;
> unsigned long flags;
>
> + u32 max_current;
> + u32 pwm;
> +
> bool have_als;
> };
>
> @@ -616,22 +621,20 @@ static const struct attribute_group
> *lm3533_led_attribute_groups[] = {
> NULL
> };
>
> -static int lm3533_led_setup(struct lm3533_led *led,
> - struct lm3533_led_platform_data *pdata)
> +static int lm3533_led_setup(struct lm3533_led *led)
> {
> int ret;
>
> - ret = lm3533_ctrlbank_set_max_current(&led->cb, pdata->max_current);
> + ret = lm3533_ctrlbank_set_max_current(&led->cb, led->max_current);
> if (ret)
> return ret;
>
> - return lm3533_ctrlbank_set_pwm(&led->cb, pdata->pwm);
> + return lm3533_ctrlbank_set_pwm(&led->cb, led->pwm);
> }
>
> static int lm3533_led_probe(struct platform_device *pdev)
> {
> struct lm3533 *lm3533;
> - struct lm3533_led_platform_data *pdata;
> struct lm3533_led *led;
> int ret;
>
> @@ -641,12 +644,6 @@ static int lm3533_led_probe(struct platform_device *pdev)
> if (!lm3533)
> return -EINVAL;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> if (pdev->id < 0 || pdev->id >= LM3533_LVCTRLBANK_COUNT) {
> dev_err(&pdev->dev, "illegal LED id %d\n", pdev->id);
> return -EINVAL;
> @@ -659,8 +656,6 @@ static int lm3533_led_probe(struct platform_device *pdev)
> led->regmap = lm3533->regmap;
> led->have_als = lm3533->have_als;
>
> - led->cdev.name = pdata->name;
> - led->cdev.default_trigger = pdata->default_trigger;
> led->cdev.brightness_set_blocking = lm3533_led_set;
> led->cdev.brightness_get = lm3533_led_get;
> led->cdev.blink_set = lm3533_led_blink_set;
> @@ -668,6 +663,15 @@ static int lm3533_led_probe(struct platform_device *pdev)
> led->cdev.groups = lm3533_led_attribute_groups;
> led->id = pdev->id;
>
> + led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d",
> + pdev->name, led->id);
Is "led-2", etc. unique enough here?
> + if (!led->cdev.name)
> + return -ENOMEM;
> +
> + led->cdev.default_trigger = "none";
> + device_property_read_string(&pdev->dev, "linux,default-trigger",
> + &led->cdev.default_trigger);
> +
> mutex_init(&led->mutex);
>
> /* The class framework makes a callback to get brightness during
> @@ -680,15 +684,22 @@ static int lm3533_led_probe(struct platform_device
> *pdev)
>
> platform_set_drvdata(pdev, led);
>
> - ret = led_classdev_register(pdev->dev.parent, &led->cdev);
> + ret = led_classdev_register(&pdev->dev, &led->cdev);
Here too you appear to be reparenting the class devices.
> if (ret) {
> - dev_err(&pdev->dev, "failed to register LED %d\n", pdev->id);
> + dev_err(&pdev->dev, "failed to register LED %d\n", led->id);
This does not seem to be necessary.
> return ret;
> }
>
> led->cb.dev = led->cdev.dev;
>
> - ret = lm3533_led_setup(led, pdata);
> + device_property_read_u32(&pdev->dev, "led-max-microamp",
> + &led->max_current);
> + led->max_current = clamp(led->max_current, LM3533_MAX_CURRENT_MIN,
> + LM3533_MAX_CURRENT_MAX);
Why clamp instead of having lm3533_led_setup() fail below?
> +
> + device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &led->pwm);
> +
> + ret = lm3533_led_setup(led);
> if (ret)
> goto err_deregister;
>
> @@ -725,9 +736,16 @@ static void lm3533_led_shutdown(struct platform_device
> *pdev)
> lm3533_led_set(&led->cdev, LED_OFF); /* disable blink */
> }
>
> +static const struct of_device_id lm3533_led_match_table[] = {
> + { .compatible = "ti,lm3533-leds" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_led_match_table);
> +
> static struct platform_driver lm3533_led_driver = {
> .driver = {
> .name = "lm3533-leds",
> + .of_match_table = lm3533_led_match_table,
> },
> .probe = lm3533_led_probe,
> .remove = lm3533_led_remove,
Remove platform alias below as well.
> diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
> index b03a3ae96c10..a5aa7da9668b 100644
> --- a/drivers/mfd/lm3533-core.c
> +++ b/drivers/mfd/lm3533-core.c
> @@ -14,19 +14,26 @@
> #include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/mfd/core.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/property.h>
> #include <linux/regmap.h>
> #include <linux/seq_file.h>
> #include <linux/slab.h>
> #include <linux/uaccess.h>
> +#include <linux/units.h>
>
> #include <linux/mfd/lm3533.h>
>
>
> #define LM3533_BOOST_OVP_MASK 0x06
> #define LM3533_BOOST_OVP_SHIFT 1
> +#define LM3533_BOOST_OVP_MIN (16 * MICRO)
> +#define LM3533_BOOST_OVP_MAX (40 * MICRO)
>
> #define LM3533_BOOST_FREQ_MASK 0x01
> #define LM3533_BOOST_FREQ_SHIFT 0
> +#define LM3533_BOOST_FREQ_MIN (500 * HZ_PER_KHZ)
> +#define LM3533_BOOST_FREQ_MAX (1000 * HZ_PER_KHZ)
>
> #define LM3533_BL_ID_MASK 1
> #define LM3533_LED_ID_MASK 3
> @@ -35,6 +42,7 @@
>
> #define LM3533_HVLED_ID_MAX 2
> #define LM3533_LVLED_ID_MAX 5
> +#define LM3533_CELLS_MAX 7
>
> #define LM3533_REG_OUTPUT_CONF1 0x10
> #define LM3533_REG_OUTPUT_CONF2 0x11
> @@ -42,44 +50,6 @@
>
> #define LM3533_REG_MAX 0xb2
>
> -
> -static struct mfd_cell lm3533_als_devs[] = {
> - {
> - .name = "lm3533-als",
> - .id = -1,
> - },
> -};
> -
> -static struct mfd_cell lm3533_bl_devs[] = {
> - {
> - .name = "lm3533-backlight",
> - .id = 0,
> - },
> - {
> - .name = "lm3533-backlight",
> - .id = 1,
> - },
> -};
> -
> -static struct mfd_cell lm3533_led_devs[] = {
> - {
> - .name = "lm3533-leds",
> - .id = 0,
> - },
> - {
> - .name = "lm3533-leds",
> - .id = 1,
> - },
> - {
> - .name = "lm3533-leds",
> - .id = 2,
> - },
> - {
> - .name = "lm3533-leds",
> - .id = 3,
> - },
> -};
> -
> /*
> * HVLED output config -- output hvled controlled by backlight bl
> */
> @@ -301,125 +271,91 @@ static const struct attribute_group
> *lm3533_attribute_groups[] = {
> NULL,
> };
>
> -static int lm3533_device_als_init(struct lm3533 *lm3533)
> -{
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> - int ret;
> -
> - if (!pdata->als)
> - return 0;
> -
> - lm3533_als_devs[0].platform_data = pdata->als;
> - lm3533_als_devs[0].pdata_size = sizeof(*pdata->als);
> -
> - ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL,
> - 0, NULL);
> - if (ret) {
> - dev_err(lm3533->dev, "failed to add ALS device\n");
> - return ret;
> - }
> -
> - lm3533->have_als = 1;
> -
> - return 0;
> -}
> -
> -static int lm3533_device_bl_init(struct lm3533 *lm3533)
> -{
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> - int i;
> - int ret;
> -
> - if (!pdata->backlights || pdata->num_backlights == 0)
> - return 0;
> -
> - if (pdata->num_backlights > ARRAY_SIZE(lm3533_bl_devs))
> - pdata->num_backlights = ARRAY_SIZE(lm3533_bl_devs);
> -
> - for (i = 0; i < pdata->num_backlights; ++i) {
> - lm3533_bl_devs[i].platform_data = &pdata->backlights[i];
> - lm3533_bl_devs[i].pdata_size = sizeof(pdata->backlights[i]);
> - }
> -
> - ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs,
> - pdata->num_backlights, NULL, 0, NULL);
> - if (ret) {
> - dev_err(lm3533->dev, "failed to add backlight devices\n");
> - return ret;
> - }
> -
> - lm3533->have_backlights = 1;
> -
> - return 0;
> -}
> -
> -static int lm3533_device_led_init(struct lm3533 *lm3533)
> -{
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> - int i;
> - int ret;
> -
> - if (!pdata->leds || pdata->num_leds == 0)
> - return 0;
> -
> - if (pdata->num_leds > ARRAY_SIZE(lm3533_led_devs))
> - pdata->num_leds = ARRAY_SIZE(lm3533_led_devs);
> -
> - for (i = 0; i < pdata->num_leds; ++i) {
> - lm3533_led_devs[i].platform_data = &pdata->leds[i];
> - lm3533_led_devs[i].pdata_size = sizeof(pdata->leds[i]);
> - }
> -
> - ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs,
> - pdata->num_leds, NULL, 0, NULL);
> - if (ret) {
> - dev_err(lm3533->dev, "failed to add LED devices\n");
> - return ret;
> - }
> -
> - lm3533->have_leds = 1;
> -
> - return 0;
> -}
> -
> static int lm3533_device_init(struct lm3533 *lm3533)
> {
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> + struct device *dev = lm3533->dev;
> + struct mfd_cell *lm3533_devices;
> + u32 count = 0, reg, nchilds;
Don't mix multiple declarations with initialisation like this.
> int ret;
>
> - dev_dbg(lm3533->dev, "%s\n", __func__);
> + nchilds = device_get_child_node_count(dev);
> + if (!nchilds || nchilds > LM3533_CELLS_MAX)
> + return dev_err_probe(dev, -ENODEV,
> + "num of child nodes is not supported\n");
>
> - if (!pdata) {
> - dev_err(lm3533->dev, "no platform data\n");
> - return -EINVAL;
> - }
> + lm3533_devices = devm_kcalloc(dev, nchilds, sizeof(*lm3533_devices),
> + GFP_KERNEL);
> + if (!lm3533_devices)
> + return -ENOMEM;
>
> - lm3533->hwen = devm_gpiod_get(lm3533->dev, NULL, GPIOD_OUT_LOW);
> - if (IS_ERR(lm3533->hwen))
> - return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen),
> "failed to request HWEN GPIO\n");
> - gpiod_set_consumer_name(lm3533->hwen, "lm3533-hwen");
> + device_for_each_child_node_scoped(dev, child) {
> + if (count >= nchilds)
> + break;
How could count be larger than nchilds?
> +
> + if (fwnode_device_is_compatible(child, "ti,lm3533-als")) {
> + lm3533_devices[count].name = "lm3533-als";
> + lm3533_devices[count].of_compatible = "ti,lm3533-als";
> + lm3533_devices[count].id = PLATFORM_DEVID_NONE;
> +
> + lm3533->have_als = true;
> + count++;
> + } else if (fwnode_device_is_compatible(child,
> "ti,lm3533-backlight")) {
> + ret = fwnode_property_read_u32(child, "reg", ®);
> + if (ret || reg >= LM3533_HVLED_ID_MAX) {
> + dev_err(dev, "invalid backlight node %pfw\n",
> child);
> + continue;
> + }
> +
> + lm3533_devices[count].name = "lm3533-backlight";
> + lm3533_devices[count].of_compatible =
> "ti,lm3533-backlight";
> + lm3533_devices[count].id = reg;
> + lm3533_devices[count].of_reg = reg;
> + lm3533_devices[count].use_of_reg = true;
> +
> + lm3533->have_backlights = true;
> + count++;
> + } else if (fwnode_device_is_compatible(child,
> "ti,lm3533-leds")) {
> + ret = fwnode_property_read_u32(child, "reg", ®);
> + if (ret || reg < LM3533_HVLED_ID_MAX ||
> + reg > LM3533_LVLED_ID_MAX) {
> + dev_err(dev, "invalid LED node %pfw\n", child);
> + continue;
> + }
> +
> + lm3533_devices[count].name = "lm3533-leds";
> + lm3533_devices[count].of_compatible = "ti,lm3533-leds";
> + lm3533_devices[count].id = reg - LM3533_HVLED_ID_MAX;
> + lm3533_devices[count].of_reg = reg;
> + lm3533_devices[count].use_of_reg = true;
> +
> + lm3533->have_leds = true;
> + count++;
> + }
> + }
Why do you need the above at all? Shouldn't you be able to just use
of_platform_populate().
>
> lm3533_enable(lm3533);
>
> ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
> LM3533_BOOST_FREQ_MASK,
> - pdata->boost_freq << LM3533_BOOST_FREQ_SHIFT);
> + lm3533->boost_freq << LM3533_BOOST_FREQ_SHIFT);
> if (ret) {
> - dev_err(lm3533->dev, "failed to set boost frequency\n");
> + dev_err(dev, "failed to set boost frequency\n");
> goto err_disable;
> }
>
> ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
> LM3533_BOOST_OVP_MASK,
> - pdata->boost_ovp << LM3533_BOOST_OVP_SHIFT);
> + lm3533->boost_ovp << LM3533_BOOST_OVP_SHIFT);
> if (ret) {
> - dev_err(lm3533->dev, "failed to set boost ovp\n");
> + dev_err(dev, "failed to set boost ovp\n");
> goto err_disable;
> }
>
> - lm3533_device_als_init(lm3533);
> - lm3533_device_bl_init(lm3533);
> - lm3533_device_led_init(lm3533);
> + ret = mfd_add_devices(dev, 0, lm3533_devices, count, NULL, 0, NULL);
> + if (ret) {
> + dev_err(dev, "failed to add MFD devices: %d\n", ret);
> + goto err_disable;
> + }
>
> return 0;
>
> @@ -504,7 +440,26 @@ static int lm3533_i2c_probe(struct i2c_client *i2c)
> return PTR_ERR(lm3533->regmap);
>
> lm3533->dev = &i2c->dev;
> - lm3533->irq = i2c->irq;
> +
> + lm3533->hwen = devm_gpiod_get_optional(lm3533->dev, "enable",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(lm3533->hwen))
> + return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen),
> + "failed to get HWEN GPIO\n");
Please use brackets around multline statements for readability
throughout.
> +
> + device_property_read_u32(lm3533->dev, "ti,boost-ovp-microvolt",
> + &lm3533->boost_ovp);
> +
> + lm3533->boost_ovp = clamp(lm3533->boost_ovp, LM3533_BOOST_OVP_MIN,
> + LM3533_BOOST_OVP_MAX);
> + lm3533->boost_ovp = lm3533->boost_ovp / (8 * MICRO) - 2;
> +
> + device_property_read_u32(lm3533->dev, "ti,boost-freq-hz",
> + &lm3533->boost_freq);
> +
> + lm3533->boost_freq = clamp(lm3533->boost_freq, LM3533_BOOST_FREQ_MIN,
> + LM3533_BOOST_FREQ_MAX);
> + lm3533->boost_freq = lm3533->boost_freq / (500 * KILO) - 1;
Again, why clamp instead of failing probe?
> return lm3533_device_init(lm3533);
> }
> @@ -518,6 +473,12 @@ static void lm3533_i2c_remove(struct i2c_client *i2c)
> lm3533_device_exit(lm3533);
> }
>
> +static const struct of_device_id lm3533_match_table[] = {
> + { .compatible = "ti,lm3533" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_match_table);
> +
> static const struct i2c_device_id lm3533_i2c_ids[] = {
> { "lm3533" },
> { }
> @@ -528,6 +489,7 @@ static struct i2c_driver lm3533_i2c_driver = {
> .driver = {
> .name = "lm3533",
> .dev_groups = lm3533_attribute_groups,
> + .of_match_table = lm3533_match_table,
> },
> .id_table = lm3533_i2c_ids,
> .probe = lm3533_i2c_probe,
> diff --git a/drivers/mfd/lm3533-ctrlbank.c b/drivers/mfd/lm3533-ctrlbank.c
> index 91e13cfa3cf0..3aab8ece4e8c 100644
> --- a/drivers/mfd/lm3533-ctrlbank.c
> +++ b/drivers/mfd/lm3533-ctrlbank.c
> @@ -13,11 +13,6 @@
>
> #include <linux/mfd/lm3533.h>
>
> -
> -#define LM3533_MAX_CURRENT_MIN 5000
> -#define LM3533_MAX_CURRENT_MAX 29800
> -#define LM3533_MAX_CURRENT_STEP 800
> -
> #define LM3533_PWM_MAX 0x3f
>
> #define LM3533_REG_PWM_BASE 0x14
> diff --git a/drivers/video/backlight/lm3533_bl.c
> b/drivers/video/backlight/lm3533_bl.c
> index 9ef171d3aaea..2c24647fc17a 100644
> --- a/drivers/video/backlight/lm3533_bl.c
> +++ b/drivers/video/backlight/lm3533_bl.c
> @@ -9,7 +9,9 @@
>
> #include <linux/module.h>
> #include <linux/init.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/backlight.h>
> #include <linux/regmap.h>
> #include <linux/slab.h>
> @@ -29,6 +31,9 @@ struct lm3533_bl {
> struct backlight_device *bd;
> int id;
>
> + u32 max_current;
> + u32 pwm;
> +
> bool have_als;
> };
>
> @@ -242,25 +247,25 @@ static const struct attribute_group
> *lm3533_bl_attribute_groups[] = {
> NULL,
> };
>
> -static int lm3533_bl_setup(struct lm3533_bl *bl,
> - struct lm3533_bl_platform_data *pdata)
> +static int lm3533_bl_setup(struct lm3533_bl *bl)
> {
> int ret;
>
> - ret = lm3533_ctrlbank_set_max_current(&bl->cb, pdata->max_current);
> + ret = lm3533_ctrlbank_set_max_current(&bl->cb, bl->max_current);
> if (ret)
> return ret;
>
> - return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm);
> + return lm3533_ctrlbank_set_pwm(&bl->cb, bl->pwm);
> }
>
> static int lm3533_bl_probe(struct platform_device *pdev)
> {
> struct lm3533 *lm3533;
> - struct lm3533_bl_platform_data *pdata;
> struct lm3533_bl *bl;
> struct backlight_device *bd;
> struct backlight_properties props;
> + char *name = NULL;
> + u32 default_brightness = LM3533_BL_MAX_BRIGHTNESS;
> int ret;
>
> dev_dbg(&pdev->dev, "%s\n", __func__);
> @@ -269,12 +274,6 @@ static int lm3533_bl_probe(struct platform_device *pdev)
> if (!lm3533)
> return -EINVAL;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> if (pdev->id < 0 || pdev->id >= LM3533_HVCTRLBANK_COUNT) {
> dev_err(&pdev->dev, "illegal backlight id %d\n", pdev->id);
> return -EINVAL;
> @@ -292,13 +291,21 @@ static int lm3533_bl_probe(struct platform_device *pdev)
> bl->cb.id = lm3533_bl_get_ctrlbank_id(bl);
> bl->cb.dev = NULL; /* until registered */
>
> + name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d",
> + pdev->name, pdev->id);
Unique enough (e.g. backlight-0)?
> + if (!name)
> + return -ENOMEM;
> +
> + device_property_read_u32(&pdev->dev, "default-brightness",
> + &default_brightness);
> +
> memset(&props, 0, sizeof(props));
> props.type = BACKLIGHT_RAW;
> props.max_brightness = LM3533_BL_MAX_BRIGHTNESS;
> - props.brightness = pdata->default_brightness;
> - bd = devm_backlight_device_register(&pdev->dev, pdata->name,
> - pdev->dev.parent, bl, &lm3533_bl_ops,
> - &props);
> + props.brightness = default_brightness;
> +
> + bd = devm_backlight_device_register(&pdev->dev, name, &pdev->dev,
> + bl, &lm3533_bl_ops, &props);
Here too you are reparenting, which results in an ABI break.
> if (IS_ERR(bd)) {
> dev_err(&pdev->dev, "failed to register backlight device\n");
> return PTR_ERR(bd);
> @@ -309,12 +316,19 @@ static int lm3533_bl_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, bl);
>
> - backlight_update_status(bd);
> + device_property_read_u32(&pdev->dev, "led-max-microamp",
> + &bl->max_current);
> + bl->max_current = clamp(bl->max_current, LM3533_MAX_CURRENT_MIN,
> + LM3533_MAX_CURRENT_MAX);
Clamping instead of failing.
>
> - ret = lm3533_bl_setup(bl, pdata);
> + device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &bl->pwm);
> +
> + ret = lm3533_bl_setup(bl);
> if (ret)
> return ret;
>
> + backlight_update_status(bd);
> +
> ret = lm3533_ctrlbank_enable(&bl->cb);
> if (ret)
> return ret;
> @@ -366,11 +380,18 @@ static void lm3533_bl_shutdown(struct platform_device
> *pdev)
> lm3533_ctrlbank_disable(&bl->cb);
> }
>
> +static const struct of_device_id lm3533_bl_match_table[] = {
> + { .compatible = "ti,lm3533-backlight" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_bl_match_table);
> +
> static struct platform_driver lm3533_bl_driver = {
> .driver = {
> .name = "lm3533-backlight",
> .pm = &lm3533_bl_pm_ops,
> .dev_groups = lm3533_bl_attribute_groups,
> + .of_match_table = lm3533_bl_match_table,
> },
> .probe = lm3533_bl_probe,
> .remove = lm3533_bl_remove,
Drop platform module alias below.
Johan
