On Fri, Jul 17, 2026 at 10:55:51AM -0500, Frank Li wrote:
> On Fri, Jul 17, 2026 at 12:28:07PM +0000, [email protected] wrote:
> > Thank you for your contribution! Sashiko AI review found 1 potential 
> > issue(s) to consider:
> > - [Low] Introduction of the legacy, non-standard `interface-pix-fmt` 
> > property for a standard hardware concept (parallel bus width), violating 
> > modern DT principles.
> > --
> >
> > --- Patch [1]: [PATCH v1 1/4] dt-bindings: lcdif: Add interface pixel 
> > format ---
> > commit 7225ea545d2ff50540972dd75d375b8ecea4f315
> > Author: Francesco Dolcini <[email protected]>
> >
> > dt-bindings: lcdif: Add interface pixel format
> >
> > This commit updates the fsl,lcdif device tree binding to support the
> > interface-pix-fmt property. The property is used to describe the hardware's
> > parallel data bus transfer width to match board wiring and prevent shifted
> > colors.
> >
> > > diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml 
> > > b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
> > > index 2dd0411ec6516..209ee5a96e393 100644
> > > --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
> > > +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
> > > @@ -58,6 +58,13 @@ properties:
> > >      items:
> > >        - const: rx
> > >
> > > +  interface-pix-fmt:
> > > +    $ref: /schemas/types.yaml#/definitions/string
> > > +    enum:
> > > +      - rgb24
> > > +      - rgb565
> > > +      - rgb666
> >
> > [Severity: Low]
> > Is this introducing a legacy, non-standard property into the new schema ABI?
> >
> > Standard devicetree guidelines usually prefer endpoint properties like
> > bus-width (defined in video-interfaces.yaml) to describe physical parallel
> > data line configurations, such as setting bus-width = <18> for RGB666.
> 
> Make sense, can we use standard property?

video-interfaces.yaml is for video capture interfaces (cameras and the
media/v4l subsystem). It does not apply here for DPI display interfaces.

Francesco

Reply via email to