nouveau_drm_device_init() calls pm_runtime_use_autosuspend(), but
nouveau_drm_device_fini() does not call the matching
pm_runtime_dont_use_autosuspend().
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped and usage_count remains
unbalanced.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the common
device teardown path.
This issue was found by manual code inspection.
Fixes: 5addcf0a5f0f ("nouveau: add runtime PM support (v0.9)")
Cc: [email protected]
Signed-off-by: Guangshuo Li <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_drm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c
b/drivers/gpu/drm/nouveau/nouveau_drm.c
index e16f59b00f6f..1579a4b0785e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -585,6 +585,7 @@ nouveau_drm_device_fini(struct nouveau_drm *drm)
if (nouveau_pmops_runtime()) {
pm_runtime_get_sync(dev->dev);
pm_runtime_forbid(dev->dev);
+ pm_runtime_dont_use_autosuspend(dev->dev);
}
nouveau_led_fini(dev);
--
2.43.0
