The EDU sample added later in this series covers everything
rust_driver_pci demonstrates (device matching, BAR mapping, MMIO) and
exercises interrupts and DMA on top, against a device every QEMU ships.
Remove the old sample in favor of it, as requested by Danilo during
review of the EDU series.

Link: 
https://lore.kernel.org/rust-for-linux/[email protected]
Suggested-by: Danilo Krummrich <[email protected]>
Signed-off-by: Maurice Hieronymus <[email protected]>
---
 MAINTAINERS                     |   1 -
 samples/rust/Kconfig            |  11 ---
 samples/rust/Makefile           |   1 -
 samples/rust/rust_driver_pci.rs | 194 ----------------------------------------
 4 files changed, 207 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 95f6791c41bc..92bc1f8c4f8a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20915,7 +20915,6 @@ T:      git 
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git
 F:     rust/helpers/pci.c
 F:     rust/kernel/pci.rs
 F:     rust/kernel/pci/
-F:     samples/rust/rust_driver_pci.rs
 
 PCIE BANDWIDTH CONTROLLER
 M:     Ilpo Järvinen <[email protected]>
diff --git a/samples/rust/Kconfig b/samples/rust/Kconfig
index c49ab9106345..0cae695acd84 100644
--- a/samples/rust/Kconfig
+++ b/samples/rust/Kconfig
@@ -107,17 +107,6 @@ config SAMPLE_RUST_I2C_CLIENT
 
          If unsure, say N.
 
-config SAMPLE_RUST_DRIVER_PCI
-       tristate "PCI Driver"
-       depends on PCI
-       help
-         This option builds the Rust PCI driver sample.
-
-         To compile this as a module, choose M here:
-         the module will be called rust_driver_pci.
-
-         If unsure, say N.
-
 config SAMPLE_RUST_DRIVER_PLATFORM
        tristate "Platform Driver"
        help
diff --git a/samples/rust/Makefile b/samples/rust/Makefile
index 6c0aaa58cccc..70495fed886f 100644
--- a/samples/rust/Makefile
+++ b/samples/rust/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_SAMPLE_RUST_DEBUGFS_SCOPED)        += 
rust_debugfs_scoped.o
 obj-$(CONFIG_SAMPLE_RUST_DMA)                  += rust_dma.o
 obj-$(CONFIG_SAMPLE_RUST_DRIVER_I2C)           += rust_driver_i2c.o
 obj-$(CONFIG_SAMPLE_RUST_I2C_CLIENT)           += rust_i2c_client.o
-obj-$(CONFIG_SAMPLE_RUST_DRIVER_PCI)           += rust_driver_pci.o
 obj-$(CONFIG_SAMPLE_RUST_DRIVER_PLATFORM)      += rust_driver_platform.o
 obj-$(CONFIG_SAMPLE_RUST_DRIVER_USB)           += rust_driver_usb.o
 obj-$(CONFIG_SAMPLE_RUST_DRIVER_FAUX)          += rust_driver_faux.o
diff --git a/samples/rust/rust_driver_pci.rs b/samples/rust/rust_driver_pci.rs
deleted file mode 100644
index 1aa8197d8698..000000000000
--- a/samples/rust/rust_driver_pci.rs
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-//! Rust PCI driver sample (based on QEMU's `pci-testdev`).
-//!
-//! To make this driver probe, QEMU must be run with `-device pci-testdev`.
-
-use kernel::{
-    device::{
-        Bound,
-        Core, //
-    },
-    io::{
-        register,
-        register::Array,
-        Io, //
-    },
-    num::Bounded,
-    pci,
-    prelude::*, //
-};
-
-mod regs {
-    use super::*;
-
-    register! {
-        pub(super) TEST(u8) @ 0x0 {
-            7:0 index => TestIndex;
-        }
-
-        pub(super) OFFSET(u32) @ 0x4 {
-            31:0 offset;
-        }
-
-        pub(super) DATA(u8) @ 0x8 {
-            7:0 data;
-        }
-
-        pub(super) COUNT(u32) @ 0xC {
-            31:0 count;
-        }
-    }
-
-    pub(super) const END: usize = 0x10;
-}
-
-type Bar0<'bound> = pci::Bar<'bound, { regs::END }>;
-
-#[derive(Copy, Clone, Debug)]
-struct TestIndex(u8);
-
-impl From<Bounded<u8, 8>> for TestIndex {
-    fn from(value: Bounded<u8, 8>) -> Self {
-        Self(value.into())
-    }
-}
-
-impl From<TestIndex> for Bounded<u8, 8> {
-    fn from(value: TestIndex) -> Self {
-        value.0.into()
-    }
-}
-
-impl TestIndex {
-    const NO_EVENTFD: Self = Self(0);
-}
-
-struct SampleDriverData<'bound> {
-    pdev: &'bound pci::Device,
-    bar: Bar0<'bound>,
-    index: TestIndex,
-}
-
-struct SampleDriver;
-
-kernel::pci_device_table!(
-    PCI_TABLE,
-    MODULE_PCI_TABLE,
-    <SampleDriver as pci::Driver>::IdInfo,
-    [(
-        pci::DeviceId::from_id(pci::Vendor::REDHAT, 0x5),
-        TestIndex::NO_EVENTFD
-    )]
-);
-
-impl SampleDriverData<'_> {
-    fn testdev(index: &TestIndex, bar: &Bar0<'_>) -> Result<u32> {
-        // Select the test.
-        bar.write_reg(regs::TEST::zeroed().with_index(*index));
-
-        let offset = bar.read(regs::OFFSET).into_raw() as usize;
-        let data = bar.read(regs::DATA).into();
-
-        // Write `data` to `offset` to increase `count` by one.
-        //
-        // Note that we need `try_write8`, since `offset` can't be checked at 
compile-time.
-        bar.try_write8(data, offset)?;
-
-        Ok(bar.read(regs::COUNT).into())
-    }
-
-    fn config_space(pdev: &pci::Device<Bound>) {
-        let config = pdev.config_space();
-
-        // Some PCI configuration space registers.
-        register! {
-            VENDOR_ID(u16) @ 0x0 {
-                15:0 vendor_id;
-            }
-
-            REVISION_ID(u8) @ 0x8 {
-                7:0 revision_id;
-            }
-
-            BAR(u32)[6] @ 0x10 {
-                31:0 value;
-            }
-        }
-
-        dev_info!(
-            pdev,
-            "pci-testdev config space read8 rev ID: {:x}\n",
-            config.read(REVISION_ID).revision_id()
-        );
-
-        dev_info!(
-            pdev,
-            "pci-testdev config space read16 vendor ID: {:x}\n",
-            config.read(VENDOR_ID).vendor_id()
-        );
-
-        dev_info!(
-            pdev,
-            "pci-testdev config space read32 BAR 0: {:x}\n",
-            config.read(BAR::at(0)).value()
-        );
-    }
-}
-
-impl pci::Driver for SampleDriver {
-    type IdInfo = TestIndex;
-    type Data<'bound> = SampleDriverData<'bound>;
-
-    const ID_TABLE: pci::IdTable<Self::IdInfo> = &PCI_TABLE;
-
-    fn probe<'bound>(
-        pdev: &'bound pci::Device<Core<'_>>,
-        info: &'bound Self::IdInfo,
-    ) -> impl PinInit<Self::Data<'bound>, Error> + 'bound {
-        let vendor = pdev.vendor_id();
-        dev_dbg!(
-            pdev,
-            "Probe Rust PCI driver sample (PCI ID: {}, 0x{:x}).\n",
-            vendor,
-            pdev.device_id()
-        );
-
-        pdev.enable_device_mem()?;
-        pdev.set_master();
-
-        let bar = pdev.iomap_region_sized::<{ regs::END }>(0, 
c"rust_driver_pci")?;
-
-        dev_info!(
-            pdev,
-            "pci-testdev data-match count: {}\n",
-            SampleDriverData::testdev(info, &bar)?
-        );
-        SampleDriverData::config_space(pdev);
-
-        Ok(SampleDriverData {
-            pdev,
-            bar,
-            index: *info,
-        })
-    }
-
-    fn unbind<'bound>(_pdev: &'bound pci::Device<Core<'_>>, this: 
Pin<&Self::Data<'bound>>) {
-        this.bar
-            .write_reg(regs::TEST::zeroed().with_index(this.index));
-    }
-}
-
-impl Drop for SampleDriverData<'_> {
-    fn drop(&mut self) {
-        dev_dbg!(self.pdev, "Remove Rust PCI driver sample.\n");
-    }
-}
-
-kernel::module_pci_driver! {
-    type: SampleDriver,
-    name: "rust_driver_pci",
-    authors: ["Danilo Krummrich"],
-    description: "Rust PCI driver",
-    license: "GPL v2",
-}

-- 
2.54.0

Reply via email to