The KSEG1ADDR() macro is only defined for non-64BIT builds. Use the CKSEG1ADDR() macro instead.
In file included from ../drivers/video/fbdev/maxinefb.c:34: ../drivers/video/fbdev/maxinefb.c: In function 'maxinefb_ims332_write_register': ../include/video/maxinefb.h:16:41: error: implicit declaration of function 'KSEG1ADDR'; did you mean 'CKSEG1ADDR'? [-Wimplicit-function-declaration] 16 | #define MAXINEFB_IMS332_ADDRESS KSEG1ADDR(0x1c140000) ../drivers/video/fbdev/maxinefb.c:66:49: note: in expansion of macro 'MAXINEFB_IMS332_ADDRESS' 66 | register unsigned char *regs = (char *) MAXINEFB_IMS332_ADDRESS; ../drivers/video/fbdev/maxinefb.c:66:40: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 66 | register unsigned char *regs = (char *) MAXINEFB_IMS332_ADDRESS; Signed-off-by: Randy Dunlap <[email protected]> --- Cc: Helge Deller <[email protected]> Cc: [email protected] Cc: [email protected] Cc: "Maciej W. Rozycki" <[email protected]> include/video/maxinefb.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- linux-next-20260812.orig/include/video/maxinefb.h +++ linux-next-20260812/include/video/maxinefb.h @@ -13,13 +13,13 @@ /* * IMS332 video controller register base address */ -#define MAXINEFB_IMS332_ADDRESS KSEG1ADDR(0x1c140000) +#define MAXINEFB_IMS332_ADDRESS CKSEG1ADDR(0x1c140000) /* * Begin of DECstation 5000/xx onboard framebuffer memory, default resolution * is 1024x768x8 */ -#define DS5000_xx_ONBOARD_FBMEM_START KSEG1ADDR(0x0a000000) +#define DS5000_xx_ONBOARD_FBMEM_START CKSEG1ADDR(0x0a000000) /* * The IMS 332 video controller used in the DECstation 5000/xx series
