dsicm_probe() registers the display before initializing ddata->lock.
Once omapdss_register_display() publishes the display, another consumer
can reach a dsicm callback that takes this mutex while it is still
uninitialized.
Initialize the mutex before registering the display so the published
callbacks always see a valid lock.
Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
Cc: [email protected]
Signed-off-by: Runyu Xiao <[email protected]>
---
drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
index 1d75f27c6b80..ce1d4d5f4034 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
@@ -1151,14 +1151,14 @@ static int dsicm_probe(struct platform_device *pdev)
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
+ mutex_init(&ddata->lock);
+
r = omapdss_register_display(dssdev);
if (r) {
dev_err(dev, "Failed to register panel\n");
goto err_reg;
}
- mutex_init(&ddata->lock);
-
atomic_set(&ddata->do_update, 0);
ddata->reset_gpio = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
--
2.34.1
