[PATCH] drm/msm/dpu: clear pending flush state before physical cleanup

[Saim Shujah]

Hardware can consume an active-frame CTL flush while the cached software
pending-flush mask retains the submitted bits. Video-mode disable stops the
timing engine before physical cleanup, which then adds teardown bits to the
stale cached mask.

The teardown trigger can replay source-pipe bits after timing
stops, leaving one pending and preventing the first commit after re-enable.

Clear the cached pending-flush bookkeeping before constructing the teardown
state. clear_pending_flush() updates software bookkeeping only; it does not
write the hardware CTL_FLUSH register.

Fixes: 22cb02bc96ff ("drm/msm/disp/dpu: reset the datapath after timing engine 
disable")
Cc: sta...@vger.kernel.org
Signed-off-by: Saim Shujah <saim...@gmail.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c 
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 778e231..f3b1fdc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2264,6 +2264,7 @@ void dpu_encoder_helper_phys_cleanup(struct 
dpu_encoder_phys *phys_enc)
 
        dpu_enc = to_dpu_encoder_virt(phys_enc->parent);
 
+       ctl->ops.clear_pending_flush(ctl);
        ctl->ops.reset(ctl);
 
        dpu_encoder_helper_reset_mixers(phys_enc);
-- 
2.55.0