https://bugs.freedesktop.org/show_bug.cgi?id=41561
--- Comment #8 from Alex Deucher <agd5f at yahoo.com> 2011-10-07 11:16:14 PDT --- (In reply to comment #6) > Results: > > DVI-D hotplug works fine. There is a delay on the first DVI-D hotplug after > the > connector has been used for VGA, but I get an event within 10 seconds. good. > > No events when I plug in the adapter with no load and wait 20 seconds. > As expected. > No events when I plug in the adapter with load but not DDC and wait 20 > seconds. > There's no way to get events for this case without doing load detection in the hotplug polling. We don't currently support that case as load detection has the potential to cause flicker on connectors that share resources. If you need it, you can remove the !force checks in the connector detect functions, but you may get flicker on other connectors if they share resources. > Events on connect only when I plug in the adapter with DDC. As expected. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
