Hi Tomi,
v3 of this series went out on 09-16 and has not had a comment since. I do not
want to keep reposting it, so this is just a nudge in case it fell off the pile.
1/2 dt-bindings: display: ti,tpd12s015: Convert to DT schema
<[email protected]>
2/2 ARM: dts: ti/omap: drop unit-address from tpd12s015 endpoints
<[email protected]>
Where it stands:
- 1/2 replaces ti,tpd12s015.txt with a schema. The one thing that changed
after v2 is the gpios range. v2 capped it at three on the assumption that
no board passes more, but omap5-igep0050.dts passes five, its DDC SCL and
SDA lines following the three the driver uses. v3 allows three to five and
says so in the description, so igep0050 keeps validating.
- 2/2 drops a unit-address that has no matching reg property from four
endpoint nodes on am5729-beagleboneai and am57xx-idk-common. That is the
only reason the two are in one series; 1/2 does not depend on it and it
can go in separately if you would rather.
dt_binding_check is clean on both.
I have left [email protected] off this message. Mail to that address
bounces: the alias forwards to [email protected], which discards it,
so he has not seen any of the three postings. If the igep0050 part needs his
input, someone else will have to supply it.
If neither patch is wanted, say so and I will drop them.
Thanks,
Quchaosheng
