On Fri, Sep 25, 2026 at 03:29:27PM +0530, Aniket Limaye wrote:
> On 25/09/26 15:11, Andy Shevchenko wrote:
> > On Fri, Sep 25, 2026 at 12:26:27PM +0530, Aniket Limaye wrote:
...
> > Still doesn't look good. The current register layout may be left as is. What
> > you need is translate it in the respective regmap callbacks in case we are
> > enumerated on the different IP. Also possible to have a different regmap
> > config for the different HW where you translate them only in one place.
>
> Is it confusing to keep using existing offsets in regmap_read/write() call
> sites for TDA54, and let the regmap silently handle the translation?
>
> Given that we do *not* have any new registers in use on the tda54 version
> that were not there in the original one, I guess it works... will send a v4
> as per your suggestion.
Depends on the mapping. Your series also forgot to provide the differences
Check this as an example: e539f435cb9c ("spi: dw: Add support for DesignWare
DWC_ssi").
--
With Best Regards,
Andy Shevchenko
