On Tue, 2026-09-29 at 10:00 +0300, Hogander, Jouni wrote:
> On Tue, 2026-09-15 at 23:34 +0530, Animesh Manna wrote:
> > Only use the table when the link rate is listed (idx valid)
> > and the LTTPR count is within the table bounds. A zero entry
> > means the rate has no tabulated value, so fall back to the
> > computed establishment period below.
> >
> > Note: The table and its values are taken from DP2.1 vesa spec.
> >
> > v2: Add check for negative error codes from drm_dp_lttpr_count().
> > [sashiko]
> >
> > Cc: Jouni Högander <[email protected]>
> > Signed-off-by: Animesh Manna <[email protected]>
> > ---
> > drivers/gpu/drm/i915/display/intel_alpm.c | 95
> > +++++++++++++++++++++++
> > 1 file changed, 95 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c
> > b/drivers/gpu/drm/i915/display/intel_alpm.c
> > index dc025058a626..cb24bba801a1 100644
> > --- a/drivers/gpu/drm/i915/display/intel_alpm.c
> > +++ b/drivers/gpu/drm/i915/display/intel_alpm.c
> > @@ -122,6 +122,92 @@ static int get_dp_link_symbol_size(const
> > struct
> > intel_crtc_state *crtc_state)
> > return intel_dp_is_uhbr(crtc_state) ? 32 : 10;
> > }
> >
> > +#define DEFAULT_MAX_LTTPR_COUNT 7
> > +#define MAX_SUPPORTED_DP_LINK_RATES 12
> > +
> > +static const u32
> > establishment_periods[DEFAULT_MAX_LTTPR_COUNT][MAX_SUPPORTED_DP_LIN
> > K_
> > RATES] = {
> > + /* 1620, 2160, 2430, 2700, 3240, 4320, 5400, 6750, 8100,
> > 10000, 13500, 20000 */
> > + /* No Retimers */
> > + { 61070, 0, 0, 56710, 0, 0, 53450, 0, 52360, 59050, 56750,
> > 54620 },
> > + /* 1 Retimer */
> > + { 155670, 0, 0, 151310, 0, 0, 148050, 0, 146960, 153650,
> > 151350, 149220 },
> > + /* 2 Retimers */
> > + { 181160, 0, 0, 172450, 0, 0, 165910, 0, 163740, 177120,
> > 172520, 168220 },
> > + /* 3 Retimers */
> > + { 206650, 0, 0, 193580, 0, 0, 183780, 0, 180510, 200590,
> > 193690, 187290 },
> > + /* 4 Retimers */
> > + { 232140, 0, 0, 214710, 0, 0, 201650, 0, 197290, 224060,
> > 214860, 206320 },
> > + /* 5 Retimers */
> > + { 257620, 0, 0, 235850, 0, 0, 219510, 0, 214070, 247530,
> > 236030, 225360 },
> > + /* 6 Retimers */
> > + { 283110, 0, 0, 256980, 0, 0, 237380, 0, 230850, 271000,
> > 257200, 244390 },
> > +};
> > +
> > +enum link_rate_idx {
> > + LINK_RATE_INVALID = -1,
> > + LINK_RATE_1,
> > + LINK_RATE_2,
> > + LINK_RATE_3,
> > + LINK_RATE_4,
> > + LINK_RATE_5,
> > + LINK_RATE_6,
> > + LINK_RATE_7,
> > + LINK_RATE_8,
> > + LINK_RATE_9,
> > + LINK_RATE_10,
> > + LINK_RATE_11,
> > + LINK_RATE_12
> > +};
> > +
> > +static int get_link_rate_index(int port_clock)
> > +{
> > + int link_rate_index;
> > +
> > + switch (port_clock) {
> > + case 162000:
> > + link_rate_index = LINK_RATE_1; // Rate_1 (RBR) -
> > 1.62 Gbps/Lane
> > + break;
> > + case 216000:
> > + link_rate_index = LINK_RATE_2; // Rate_2 -
> > 2.16 Gbps/Lane
> > + break;
> > + case 243000:
> > + link_rate_index = LINK_RATE_3; // Rate_3 -
> > 2.43 Gbps/Lane
> > + break;
> > + case 270000:
> > + link_rate_index = LINK_RATE_4; // Rate_4 (HBR) -
> > 2.70 Gbps/Lane
> > + break;
> > + case 324000:
> > + link_rate_index = LINK_RATE_5; // Rate_5 (RBR2)-
> > 3.24 Gbps/Lane
> > + break;
> > + case 432000:
> > + link_rate_index = LINK_RATE_6; // Rate_6 -
> > 4.32 Gbps/Lane
> > + break;
> > + case 540000:
> > + link_rate_index = LINK_RATE_7; // Rate_7 (HBR2)-
> > 5.40 Gbps/Lane
> > + break;
> > + case 675000:
> > + link_rate_index = LINK_RATE_8; // Rate_8 -
> > 6.75 Gbps/Lane
> > + break;
> > + case 810000:
> > + link_rate_index = LINK_RATE_9; // Rate_9 (HBR3)-
> > 8.10 Gbps/Lane
> > + break;
> > + case 1000000:
> > + link_rate_index = LINK_RATE_10; // Rate_10
> > (UHBR10) - 10.0 Gbps/Lane
> > + break;
> > + case 1350000:
> > + link_rate_index = LINK_RATE_11; // Rate_11
> > (UHBR13.5) - 13.5 Gbps/Lane
> > + break;
> > + case 2000000:
> > + link_rate_index = LINK_RATE_12; // Rate_12
> > (UHBR20) - 20.0 Gbps/Lane
> > + break;
> > + default:
> > + link_rate_index = LINK_RATE_INVALID;
> > + break;
> > + }
> > +
> > + return link_rate_index;
> > +}
>
> Difference between what this table is giving us and what we are
> getting
> from the formula is coming from SILENCE_PERIOD_TIME and tlfps_period.
> In DP spec they are using max values while our calculation is using
> midpoint.
>
> I think we could just switch to max values on these and drop adding
> tables completely.
This would unnecessarily increase our wake-time. Maybe we could just
accept the difference between calculated and pre-calculated values as
we understand where it comes from? We are using mid point in the
configuration and that is what we use in wake time calculation as well.
Values table from VESA spec are calculated using max values.
BR,
Jouni Högander
>
> BR,
> Jouni Högander
>
> > +
> > static int get_establishment_period(struct intel_dp *intel_dp,
> > const struct intel_crtc_state
> > *crtc_state)
> > {
> > @@ -138,8 +224,17 @@ static int get_establishment_period(struct
> > intel_dp *intel_dp,
> > if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) {
> > tcds = (7 + DIV_ROUND_UP(6500, tml_phy_lock) + 1)
> > *
> > tml_phy_lock;
> > } else {
> > + int idx = get_link_rate_index(crtc_state-
> > > port_clock);
> > +
> > tcds = 7 * tml_phy_lock;
> > lttpr_count = drm_dp_lttpr_count(intel_dp-
> > > lttpr_common_caps);
> > +
> > + if (idx != LINK_RATE_INVALID && lttpr_count >= 0
> > &&
> > + lttpr_count < DEFAULT_MAX_LTTPR_COUNT &&
> > + establishment_periods[lttpr_count][idx]) {
> > + establishment_period =
> > establishment_periods[lttpr_count][idx];
> > + return establishment_period;
> > + }
> > }
> >
> > if (lttpr_count > 0) {
>
