On 10/1/2026 3:25 PM, Dmitry Baryshkov wrote:
> On Thu, Oct 01, 2026 at 08:57:52AM +0200, Krzysztof Kozlowski wrote:
>> On 01/10/2026 08:55, Krzysztof Kozlowski wrote:
>>> On Tue, Sep 29, 2026 at 06:42:20PM +0530, Arpit Saini wrote:
>>>> Some boards drive the ILI7807S panel's backlight from an external
>>>> WLED driver whose enable input is wired to a GPIO, typically modeled
>>>> as a fixed regulator (e.g. vreg_wled).
>>>
>>> You describe something else. What's fixed regulator should not matter
>>> here. Which pin is it in ILI7807S?
>>>
>>> It seems you just want to represent GPIO with a regulator. This is just
>>> confusing and typical downstream workaround.
>>
>> What's more, you basically REVERT the review YOU RECEIVED in v1. Really,
>> just sneak the same stuff 3 months after like the review never happened.
>>
>> NAK
>
> After discussing this offline with Krzysztof. It's not a supply (my
> fault), it's an LCD driver. So, the best way to handle your displaycard
> seems to add a gpio-backlight, reference it from the panel and then in
> the driver check for the backlight's max_brightness level. If it's 1,
> then you have to send extra DCS commands to control PWM. If it's
> higher, use normal backlight class controls.
>
Hi Dmitry, Krzysztof
I have a few clarifying questions regarding the proposed approach. Please let
me know if I've misunderstood anything.
panel_backlight: backlight {
compatible = "gpio-backlight";
gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
default-on;
};
1) Adding gpio-backlight and check for max_brightness level if its 1,
If we model LCD_BKLT_EN using gpio-backlight, the backlight device
effectively exposes only on/off control (max_brightness = 1),
we can't support the full range of brightness i.e 0 to 16383 (0x3FFF)
2) Adding gpio-backlight and based upon max_brightness level of 1 , are you
suggesting to register another
backlight device that can actually drive DCS brightness. In that case we can
actually have the MIPI DCS controlled brightness
If so, wouldn't that result in two backlight devices associated with the
same panel:
gpio-backlight device for enable/disable
panel backlight device for DCS brightness control
Is that the expected design?
3) I previously tried modeling LCD_BKLT_EN using pinctrl states (panel_bl_en /
panel_bl_suspend)
for the enable GPIO itself. However, Dmitry suggested modeling it as a
regulator instead:
Link :
https://lore.kernel.org/all/qkhgg5x67sijiialucvzac275zhpjrtt47a4udjpyzmgvilut5@dcrslq3ai7mc/
4) Modeled optional regulator wled-supply: a regulator that only gates the
external backlight driver chip's power/enable,
with DCS remaining the sole brightness path in this current patch , the
panel-himax-hx83121a.c does exactly the same.
Would this can be the preferred modeling for such panels?
Please refer to this Hardware diagram I explained earlier ,
Link :
https://lore.kernel.org/all/[email protected]/
Please let me know your suggestions.
Thanks,
Arpit
