Hi Devarsh, Setup: Raspberry Pi 5, rpi-7.2.y with your patches 01-12/14 cherry-picked and the panel entry added locally, SPI0 CE0 at 5 and 20 MHz, DC/RST/BUSY on GPIO5/6/26, CONFIG_DRM_SSD16XX=y, drm.debug=0x02, no compositor.
Bring-up is clean: it probes, the connector comes up at 800x480, and reset/BUSY and runtime PM all work. The three issues I reported on 31 July [1] are all gone - the mirroring is fixed by 11/14 [2], rotation 180 draws, and refresh_mode takes effect. All four DT rotation values work, and so do the plane properties - refresh_mode, color_mode, clear_on_init/close/disable and refresh_mode_init. SPI is fine at both 5 and 20 MHz. Tested-by: LiangCheng Wang <[email protected]> [1] https://lore.kernel.org/all/[email protected]/ [2] https://lore.kernel.org/all/[email protected]/ Regards, LiangCheng
