On Thu, Oct 15, 2026 at 01:08:21PM +0530, Jayant Shekhar wrote:
> DCP platforms place the display pipeline under firmware control, so Linux
> cannot discover display resources through direct register access. The DRM
> driver therefore needs device-tree descriptions of the firmware transport,
> display topology, IOMMU contexts, and panel connections.

Due to dependencies this cannot be tested, so limited review.

A nit, subject: drop second/last, redundant "bindings". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v7.1-rc7/source/Documentation/devicetree/bindings/submitting-patches.rst#L23

> 
> Add bindings for the Qualcomm DCP VirtIO display function, including the
> INTF graph and DSI host outputs. Document the framebuffer IOMMU context,
> IPCC power-notify mailbox and interrupts, firmware display topology, and
> firmware-visible IOVA window supplied by the parent VirtIO-MMIO transport.
> 
> Signed-off-by: Jayant Shekhar <[email protected]>
> Assisted-by: LLM
> ---
>  .../bindings/display/msm/qcom,dcp-dsi.yaml         |  75 +++++++++++++
>  .../bindings/display/msm/qcom,dcp-virtio.yaml      | 113 +++++++++++++++++++
>  .../devicetree/bindings/display/msm/qcom,dcp.yaml  | 119 
> +++++++++++++++++++++
>  3 files changed, 307 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,dcp-dsi.yaml 
> b/Documentation/devicetree/bindings/display/msm/qcom,dcp-dsi.yaml
> new file mode 100644
> index 000000000000..f7178c66c09e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,dcp-dsi.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/qcom,dcp-dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm DCP DSI host
> +
> +maintainers:
> +  - Jayant Shekhar <[email protected]>
> +
> +description: |
> +  A MIPI DSI host exposed by the Qualcomm DCP VirtIO device (see
> +  qcom,dcp.yaml). DCP is a firmware protocol shared across multiple
> +  Qualcomm SoCs, not specific to any one of them; Hawi is its first
> +  platform. The DSI host and its connection to a panel are described
> +  using the standard DSI controller and OF graph properties.
> +
> +allOf:
> +  - $ref: /schemas/display/dsi-controller.yaml#
> +
> +properties:
> +  reg:
> +    maxItems: 1
> +    description: Index of this DSI host among its siblings.
> +
> +  status: true

I see slop, I finished here. Mind this maintainers summit words - if you
use AI, you must use good one, not the shloppy slop.

Best regards,
Krzysztof

Reply via email to