Add support for the AU Optronics B101UAN01 1920x1200 10.1" WUXGA MIPI-DSI TFT LCD panel.
The mode is taken from the MIPI interface timing section of the B101UAN01.7 (H/W 1A) datasheet and gives a 60 Hz refresh rate. Signed-off-by: Asif Ikbal <[email protected]> --- drivers/gpu/drm/panel/panel-simple.c | 32 ++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index a944c34642dc..46ec17b6c365 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -6389,6 +6389,35 @@ static const struct panel_desc_dsi auo_b080uan01 = { .lanes = 4, }; +static const struct drm_display_mode auo_b101uan01_mode = { + .clock = 148350, + .hdisplay = 1920, + .hsync_start = 1920 + 40, + .hsync_end = 1920 + 40 + 40, + .htotal = 1920 + 40 + 40 + 40, + .vdisplay = 1200, + .vsync_start = 1200 + 4, + .vsync_end = 1200 + 4 + 4, + .vtotal = 1200 + 4 + 4 + 4, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, +}; + +static const struct panel_desc_dsi auo_b101uan01 = { + .desc = { + .modes = &auo_b101uan01_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 217, + .height = 136, + }, + .connector_type = DRM_MODE_CONNECTOR_DSI, + }, + .flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE, + .format = MIPI_DSI_FMT_RGB888, + .lanes = 4, +}; + static const struct drm_display_mode boe_tv080wum_nl0_mode = { .clock = 160000, .hdisplay = 1200, @@ -6572,6 +6601,9 @@ static const struct of_device_id dsi_of_match[] = { { .compatible = "auo,b080uan01", .data = &auo_b080uan01 + }, { + .compatible = "auo,b101uan01", + .data = &auo_b101uan01 }, { .compatible = "boe,tv080wum-nl0", .data = &boe_tv080wum_nl0 -- 2.43.0
