On Mon, Oct 19, 2026 at 07:17:16AM -0300, Leonardo Costa wrote: > From: Leonardo Costa <[email protected]> > > Add a device tree overlay for the VGA output available on the Apalis > Evaluation Board, which is driven from a parallel RGB interface passing > through a non-programmable video DAC to a VGA connector, without VESA > DDC I2C signals. > > The non-programmable video DAC consists of a simple resistor ladder that > converts the digital 16-bit RGB signal to VGA. The VGA output is gated by > an active-low data-enable signal. > > The overlay is also combined with the various Apalis Evaluation Board > device trees to provide ready-to-use DTBs. > > Signed-off-by: Leonardo Costa <[email protected]> > --- > arch/arm/boot/dts/nxp/imx/Makefile | 21 ++++++ > .../boot/dts/nxp/imx/imx6q-apalis-eval-vga.dtso | 80 > ++++++++++++++++++++++
what's difference with https://lore.kernel.org/imx/[email protected]/T/#u Is it possible share one dtso also? Frank
