On Tue, Oct 20, 2026 at 03:00:07PM +0200, Marek Szyprowski wrote:
> Since commit d700fd0ff100 ("drm/bridge: tda998x: Remove component
> support") the TDA998x driver no longer registers itself as a component,
> so the HDLCD component master never gets bound and the display stays
> dead on Juno board.
>
> Drop the component framework and get the output bridge with
> devm_drm_of_get_bridge() at probe time, deferring until it becomes
> available. Create the encoder in the HDLCD driver, attach the bridge
> with DRM_BRIDGE_ATTACH_NO_CONNECTOR and use drm_bridge_connector for
> the connector, like tilcdc does since the TDA998x component support
> removal.
>
> This also makes HDLCD work with any DRM bridge, not only TDA998x.
>
> As a side effect, interlaced modes are no longer exposed on the HDMI
> connector. The connector created by TDA998x itself always allowed them,
> while drm_bridge_connector only allows them when all bridges in the
> chain set interlace_allowed, which TDA998x does not. HDLCD has no
> interlaced scanout support, so these modes were not usable anyway.
>
> Fixes: d700fd0ff100 ("drm/bridge: tda998x: Remove component support")
> Signed-off-by: Marek Szyprowski <[email protected]>
Pushed to drm-misc-next.
Best regards,
Liviu
> ---
> This patch has been developed with LLM assistance, but the results has
> been tested on the real Juno R1 board (juno-r1-scmi.dtb) with HDMI
> monitor.
>
> Bst regards
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
> ---
> drivers/gpu/drm/arm/Kconfig | 4 +-
> drivers/gpu/drm/arm/hdlcd_drv.c | 85 +++++++++++++++------------------
> drivers/gpu/drm/arm/hdlcd_drv.h | 1 +
> 3 files changed, 42 insertions(+), 48 deletions(-)
>
> diff --git a/drivers/gpu/drm/arm/Kconfig b/drivers/gpu/drm/arm/Kconfig
> index ed3ed617c688..6dcc063aa503 100644
> --- a/drivers/gpu/drm/arm/Kconfig
> +++ b/drivers/gpu/drm/arm/Kconfig
> @@ -9,7 +9,9 @@ config DRM_HDLCD
> select DRM_CLIENT_SELECTION
> select DRM_KMS_HELPER
> select DRM_GEM_DMA_HELPER
> - select DRM_BRIDGE # for TDA998x
> + select DRM_BRIDGE
> + select DRM_BRIDGE_CONNECTOR
> + select DRM_DISPLAY_HELPER
> help
> Choose this option if you have an ARM High Definition Colour LCD
> controller.
> diff --git a/drivers/gpu/drm/arm/hdlcd_drv.c b/drivers/gpu/drm/arm/hdlcd_drv.c
> index 81d45f2dd6a7..340b1bb38bf9 100644
> --- a/drivers/gpu/drm/arm/hdlcd_drv.c
> +++ b/drivers/gpu/drm/arm/hdlcd_drv.c
> @@ -13,17 +13,17 @@
> #include <linux/module.h>
> #include <linux/spinlock.h>
> #include <linux/clk.h>
> -#include <linux/component.h>
> #include <linux/console.h>
> #include <linux/dma-mapping.h>
> #include <linux/list.h>
> -#include <linux/of_graph.h>
> #include <linux/of_reserved_mem.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
>
> #include <drm/clients/drm_client_setup.h>
> #include <drm/drm_atomic_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_bridge_connector.h>
> #include <drm/drm_crtc.h>
> #include <drm/drm_debugfs.h>
> #include <drm/drm_drv.h>
> @@ -238,12 +238,43 @@ static const struct drm_driver hdlcd_driver = {
> .minor = 0,
> };
>
> -static int hdlcd_drm_bind(struct device *dev)
> +static int hdlcd_attach_bridge(struct drm_device *drm, struct drm_bridge
> *bridge)
> {
> + struct hdlcd_drm_private *hdlcd = drm_to_hdlcd_priv(drm);
> + struct drm_connector *connector;
> + int ret;
> +
> + ret = drmm_encoder_init(drm, &hdlcd->encoder, NULL,
> + DRM_MODE_ENCODER_NONE, NULL);
> + if (ret)
> + return ret;
> +
> + hdlcd->encoder.possible_crtcs = drm_crtc_mask(&hdlcd->crtc);
> +
> + ret = drm_bridge_attach(&hdlcd->encoder, bridge, NULL,
> + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> + if (ret)
> + return ret;
> +
> + connector = drm_bridge_connector_init(drm, &hdlcd->encoder);
> +
> + return PTR_ERR_OR_ZERO(connector);
> +}
> +
> +static int hdlcd_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> struct drm_device *drm;
> struct hdlcd_drm_private *hdlcd;
> + struct drm_bridge *bridge;
> int ret;
>
> + /* there is only one output port inside each device, find its bridge */
> + bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0);
> + if (IS_ERR(bridge))
> + return dev_err_probe(dev, PTR_ERR(bridge),
> + "failed to find output bridge\n");
> +
> hdlcd = devm_drm_dev_alloc(dev, &hdlcd_driver, typeof(*hdlcd), base);
> if (IS_ERR(hdlcd))
> return PTR_ERR(hdlcd);
> @@ -260,12 +291,9 @@ static int hdlcd_drm_bind(struct device *dev)
> if (ret)
> goto err_free;
>
> - /* Set the CRTC's port so that the encoder component can find it */
> - hdlcd->crtc.port = of_graph_get_port_by_id(dev->of_node, 0);
> -
> - ret = component_bind_all(dev, drm);
> + ret = hdlcd_attach_bridge(drm, bridge);
> if (ret) {
> - DRM_ERROR("Failed to bind all components\n");
> + DRM_ERROR("failed to attach bridge\n");
> goto err_unload;
> }
>
> @@ -311,10 +339,7 @@ static int hdlcd_drm_bind(struct device *dev)
> pm_runtime_disable(drm->dev);
> err_pm_active:
> drm_atomic_helper_shutdown(drm);
> - component_unbind_all(dev, drm);
> err_unload:
> - of_node_put(hdlcd->crtc.port);
> - hdlcd->crtc.port = NULL;
> hdlcd_irq_uninstall(hdlcd);
> of_reserved_mem_device_release(drm->dev);
> err_free:
> @@ -322,16 +347,14 @@ static int hdlcd_drm_bind(struct device *dev)
> return ret;
> }
>
> -static void hdlcd_drm_unbind(struct device *dev)
> +static void hdlcd_remove(struct platform_device *pdev)
> {
> + struct device *dev = &pdev->dev;
> struct drm_device *drm = dev_get_drvdata(dev);
> struct hdlcd_drm_private *hdlcd = drm_to_hdlcd_priv(drm);
>
> drm_dev_unregister(drm);
> drm_kms_helper_poll_fini(drm);
> - component_unbind_all(dev, drm);
> - of_node_put(hdlcd->crtc.port);
> - hdlcd->crtc.port = NULL;
> pm_runtime_get_sync(dev);
> drm_atomic_helper_shutdown(drm);
> hdlcd_irq_uninstall(hdlcd);
> @@ -342,38 +365,6 @@ static void hdlcd_drm_unbind(struct device *dev)
> dev_set_drvdata(dev, NULL);
> }
>
> -static const struct component_master_ops hdlcd_master_ops = {
> - .bind = hdlcd_drm_bind,
> - .unbind = hdlcd_drm_unbind,
> -};
> -
> -static int compare_dev(struct device *dev, void *data)
> -{
> - return dev->of_node == data;
> -}
> -
> -static int hdlcd_probe(struct platform_device *pdev)
> -{
> - struct device_node *port;
> - struct component_match *match = NULL;
> -
> - /* there is only one output port inside each device, find it */
> - port = of_graph_get_remote_node(pdev->dev.of_node, 0, 0);
> - if (!port)
> - return -ENODEV;
> -
> - drm_of_component_match_add(&pdev->dev, &match, compare_dev, port);
> - of_node_put(port);
> -
> - return component_master_add_with_match(&pdev->dev, &hdlcd_master_ops,
> - match);
> -}
> -
> -static void hdlcd_remove(struct platform_device *pdev)
> -{
> - component_master_del(&pdev->dev, &hdlcd_master_ops);
> -}
> -
> static void hdlcd_shutdown(struct platform_device *pdev)
> {
> drm_atomic_helper_shutdown(platform_get_drvdata(pdev));
> diff --git a/drivers/gpu/drm/arm/hdlcd_drv.h b/drivers/gpu/drm/arm/hdlcd_drv.h
> index f1c1da2ac2db..6fb48727e54e 100644
> --- a/drivers/gpu/drm/arm/hdlcd_drv.h
> +++ b/drivers/gpu/drm/arm/hdlcd_drv.h
> @@ -11,6 +11,7 @@ struct hdlcd_drm_private {
> void __iomem *mmio;
> struct clk *clk;
> struct drm_crtc crtc;
> + struct drm_encoder encoder;
> struct drm_plane *plane;
> unsigned int irq;
> #ifdef CONFIG_DEBUG_FS
> --
> 2.43.0
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
