On Fri, Oct 23, 2026 at 03:45:11PM -0400, [email protected] wrote: > From: Frank Li <[email protected]> > > Add support for the Waiken WKS101WX001-WCT, an industrial-grade 10.1-inch > IPS TFT LCD panel with a capacitive touchscreen. > > Although the module advertises LVDS support, enabling LVDS operation > requires hardware modification, including the removal of several on-board > resistors. As there are currently no known users of the LVDS configuration, > only the default interface mode is supported. > > If LVDS support is needed in the future, a dedicated driver can be > introduced to handle switching between LVDS and DBI modes.
s/DBI/DPI/ I assume that there would be a new compatible string for the panel in LVDS mode, instead of a new dedicated driver to "handle switching between LVDS and DPI modes". So, I'd rather drop the last sentence. With this address: Acked-by: Liu Ying <[email protected]> > > Signed-off-by: Frank Li <[email protected]> > --- > change in v4 > - s/LDB/DPI > - variable use 101wx001_wct > > change in v3 > - add wct surfix and change to use MEDIA_BUS_FMT_RGB888_1X24 > - Add information about lvds support plan. > > change in v2 > - update height to 135 from 136 (sashiko) > --- > drivers/gpu/drm/panel/panel-simple.c | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) [...] -- Regards, Liu Ying
