On Mon, 19 Oct 2026 14:25:36 +0300, Dmitry Baryshkov wrote: > arm64: qcom: enable display card support on SM8150 HDK > > The Qualcomm SM8150 HDK can be equipped with an optional display card > having the same panel as the display card for SDM845 HDK. Reuse the > driver submitted at [1] and enable display card support on this HDK. > > Unlike SDM845, this also requires a new LCDB driver, providing voltage > for the panel and several fixes in the WLED driver. The FSA4480 address > fix is independent and can be applied earlier. > > [...]
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-7.5 Thanks! [2/8] regulator: dt-bindings: add Qualcomm LCDB regulator https://git.kernel.org/broonie/regulator/c/487f55870c60 [4/8] regulator: add Qualcomm LCDB driver https://git.kernel.org/broonie/regulator/c/be8c26474857 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
