On Fri, Nov 6, 2026 at 7:10 PM Daniel Matyas <[email protected]> wrote: > > On Thu, Nov 05, 2026 at 10:47:06PM +0100, Nam Cao wrote: > > Daniel Matyas <[email protected]> writes: > > > Questions: > > > a) Is removing fb_ili9341 acceptable, pointing users of other ILI9341 > > > modules to panel-mipi-dbi? The KD233 node would then have no driver. > > > b) Or should KD233 panel support go into a DRM driver first? I don't have > > > its init sequence or physical size, or the board... > > > c) Is removal of all of fbtft already planned? > > > d) Several other fbtft drivers have drm counterparts. Should I inspect > > > those > > > to see if removal is needed? > > > > IIRC the main reason fbtft needs to stay is because it supports parallel > > interface which is missing in the DRM drivers. > > > > Nam > > Thank you for clarifying. However, the fb_ili9341 driver uses only the > SPI interface.
Only two drivers use that macro, indeed: drivers/staging/fbtft/fb_ili9341.c, line 136 drivers/staging/fbtft/fb_sh1106.c, line 173 > Is it alright then to move (or remove) those drivers that only use > SPI interface and have DRM counterparts? You can suggest removing it, but it might break some users (yes, I understand that FBTFT is a staging driver), but doing such only for two out of dozens drivers seems to me a bit inconsistent approach. > Furthermore, would there be a need to enable parallel interface support > in the DRM subsystem? If you can do it, I will agree on retiring the FBTFT drivers that will gain such a support. I can test 8347d (IIRC I have that panel at hand). -- With Best Regards, Andy Shevchenko
