This series includes patches 42-48 from "[PATCH v11 00/74] Add HDMI 2.0 support to DW HDMI QP TX" [1], which convert the VC4 HDMI driver to the common HDMI 2.0 scrambling infrastructure as a proof of concept for reusing the shared code. It adopts the shared TMDS character rate constants, switches to drm_hdmi_mode_needs_scrambling() and force_ctx(), fixes -EDEADLK handling, and replaces the driver-local scrambling implementation with the common SCDC scrambling helpers.
The infrastructure patches have been merged and there are no remaining dependencies, so the vc4 patches are now sent as a separate series, rebased on top of the latest drm-misc-next. Tested on a Raspberry Pi 5 Model B Rev 1.1 (BCM2712 D0). [1] https://lore.kernel.org/all/[email protected]/ Signed-off-by: Cristian Ciocaltea <[email protected]> --- Changes in v4: - Collected R-b tags from Dave - Rebased series onto the latest drm-misc-next and followed the approach recently introduced in commit 81383bd290a1 ("drm/vc4: hdmi: enable scrambling before the TMDS clock starts"): scrambling is now enabled before the PHY is started, and disabled after the PHY is stopped - Link to v3: https://patch.msgid.link/[email protected] Changes in v3: - Added new patch "Clamp CEC clock divider to its register field width" to prevent CEC register corruption after raising the BCM2835 max pixel clock to 165 MHz (Sashiko) - Moved these new patches towards the end of the series to make them easier to revert if necessary - Link to v2: https://patch.msgid.link/[email protected] Changes in v2: - Added new patch "Bump BCM2835 max pixel clock to 165 MHz" (Dave) - Simplified the last patch "Defer pixel clock validation to HDMI helpers" by dropping the now unneeded adjustment of supported_tmds_char_rate in vc4_hdmi_connector_funcs_hdmi12 - Rebased series onto latest drm-misc-next - Link to v1: https://patch.msgid.link/[email protected] --- Cristian Ciocaltea (9): drm/vc4: hdmi: Use common TMDS char rate constants drm/vc4: hdmi: Switch to drm_hdmi_mode_needs_scrambling() drm/vc4: hdmi: Switch to .force_ctx() connector helper drm/vc4: hdmi: Propagate -EDEADLK to the top level drm/vc4: hdmi: Convert to drmm_connector_hdmi_init() drm/vc4: hdmi: Convert to common HDMI 2.0 scrambling infrastructure drm/vc4: hdmi: Clamp CEC clock divider to its register field width drm/vc4: hdmi: Bump BCM2835 max pixel clock to 165 MHz drm/vc4: hdmi: Defer pixel clock validation to HDMI helpers drivers/gpu/drm/vc4/vc4_hdmi.c | 365 ++++++++++------------------------------- drivers/gpu/drm/vc4/vc4_hdmi.h | 30 +--- 2 files changed, 93 insertions(+), 302 deletions(-) --- base-commit: 8deaade4a5a4ff635df91e246e42139ab2b33f6d change-id: 20261001-vc4-common-scramb-798b2580fa81
